BASIC OPERATIONS (CONT.)
PARAMETER TIME
PARAMETER RATIO
| OFF |
|
|
|
|
|
|
|
|
POWER | ON |
|
|
|
|
|
|
|
|
| 1 2 3 4 5 6 | 7 8 9 0 | PROGRAM | NONSTOP | AUTO |
|
|
| |
|
| CUE | ELAPSED | TOTAL REMAIN | CUE BPM | KEY | |||
|
| BEAT SYNC. | LOCK | ||||||
| SINGLE |
|
|
|
|
|
|
|
|
| LOOP |
|
|
|
|
| BPM | ||
| RELOOP | T | M | S | F |
| PITCH | ||
| SCRATCH | FILTER | HOLD |
| ECHO | TRANS |
| ||
|
|
|
|
|
|
|
|
| |
| SKID | PHASE |
|
| FLANGER | PAN |
| ||
EJECT
FX SELECT SGL/CTN
TIME REV.PLAY
TEMPO ON/OFF
LOCK 4%/8%/16%
3)Press the OUT BUTTON (32) to set the ending point for your SEAMLESS LOOP (Figure 13). The IN BUTTON (14) and OUT BUTTON (32) LEDs will immediately begin to flash rapidly, indicating the SEAMLESS LOOP mode has been activated.
BOP
FX
MIX
ENTER
SAMPLE PITCH
LCD LOOP INDICATORS - During a seamless loop, the LOOP (47) and RELOOP (48) INDICATORS will turn on in the LCD DISPLAY (19) indication a loop is active.
Figure 21
EXITING A LOOP - To exit a SEAMLESS LOOP, press the OUT BUTTON (32). The IN BUTTON (14) and OUT BUTTON (32) LEDs will remain on, but will stop flashing. Music playback will resume nor- mal play (Figure 13). The IN BUTTON (14) and OUT BUTTON (32) LEDs will remain on to remind you that a loop is stored in memory.
| OFF |
|
|
|
|
|
|
POWER | ON |
|
|
|
|
|
|
| 1 2 3 4 5 6 | 7 8 9 0 | PROGRAM | NONSTOP | AUTO |
| |
PARAMETER TIME |
| CUE | ELAPSED | TOTAL REMAIN | CUE BPM | KEY | |
| BEAT SYNC. | LOCK | |||||
| SINGLE |
|
|
|
|
|
|
| LOOP |
|
|
|
|
| BPM |
| RELOOP | T | M | S | F |
| PITCH |
PARAMETER RATIO |
|
|
|
| |
| SCRATCH | FILTER | HOLD | ECHO | TRANS |
|
|
|
|
|
|
|
|
|
|
|
|
| SKID | PHASE |
| FLANGER | PAN |
BOP
FX
MIX
ENTER
EJECT
FX SELECT SGL/CTN
TIME REV.PLAY
TEMPO ON/OFF
LOCK 4%/8%/16%
SAMPLE PITCH
Figure 22
|
| OFF |
|
|
|
|
|
| |
POWER |
| ON |
|
|
|
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
PARAMETER TIME |
|
|
|
|
| CUE |
| ||
SINGLE |
|
|
|
|
|
| |||
| LOOP |
|
|
|
|
|
|
| |
RELOOP |
|
|
|
|
| T | |||
PROGRAM NONSTOP 
AUTO
CUE BPM ELAPSED TOTAL REMAIN BEAT SYNC.
M 
S 
F
KEY
LOCK
EJECT
BPM
PITCH
PARAMETER RATIO
SCRATCH FILTER HOLDECHO TRANS
SKID | PHASE | FLANGER | PAN |
BOP
FX
MIX
ENTER
FX SELECT SGL/CTN
TIME REV.PLAY
TEMPO ON/OFF
LOCK 4%/8%/16%
SAMPLE PITCH
REPLAY LOOP - The RELOOP (31) function allows you to return to your stored loop at any time. The IN BUTTON (14) and OUT BUTTON (32) LEDs will indicate a loop is stored in memory, and may be played at any time. To replay the loop, press the RELOOP BUTTON (31). The IN BUTTON (14) and OUT BUTTON (32) LEDs will again begin to flash indicating SEAMLESS LOOP mode has been activated (Figure 14) and your stored loop will immediately begin to play.
Figure 23
11. EDITING A LOOP:
Please note: Only the ending point of the loop may be edited. You may make your loop shorter or longer. Before you can edit your seamless loop you obviously must first have created a seamless loop to edit. If you haven’t created a SEAMLESS LOOP, follow the instructions in step 10 to create a loop. If a SEAMLESS LOOP has already been created, press the RELOOP BUTTON (31) to activate your SEAMLESS LOOP (Figure 23) if it is not already activated. To edit your seamless loop’s ending point:
1)Press the OUT BUTTON (32) to return to normal play from the loops cue point. (Figure 20). This will disengage the SEAMLESS LOOP mode and allows you to edit the loops ending point.
2)Press the OUT BUTTON (32) again when you reach your new ending point (Figure 21).
-FOR A SHORTER LOOP: Press the OUT BUTTON (32) at sooner point in the track (Figure 21).
-FOR LONGER LOOP: Press the OUT BUTTON (32) at later point in the track (Figure 21).
©American Audio® - www.americandj.com -