American Audio Pro-Scratch 2 manual Unpacking

Page 6

UNPACKING

Every Pro-Scratch 2™ has been thoroughly tested and has been shipped in perfect operating condi- tion. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your CD player for any damage and be sure all equip- ment necessary to operate the CD player has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return the CD player to your dealer without first contacting customer support.

INTRODUCTION

Introduction:

Congratulations and thank you for purchasing the American Audio® Pro-Scratch 2™ CD player. This CD player is a representation of American Audio’s continuing commitment to produce the best and highest quality audio products possible at an affordable price. Please read and understand this manual completely before attempting to operate your new CD player. This booklet contains important informa- tion concerning the proper and safe operation of your new CD player.

Customer Support:

American Audio® provides a toll free customer support line, to provide set up help and answer any question should you encounter problems during your initial set up or operation. You may also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time.

Voice:

(800) 322-6337

Fax:

(323) 582-2610

E-mail:

support@americandj.com

Caution! There are no user serviceable parts inside this CD player. Do not attempt any repairs your- self, without being instructed to do so by an authorized American Audio service technician. Doing so will void your manufactures warranty. In the unlikely event your CD player may require service, please contact American Audio® customer support.

Do not discard the packing carton in the trash. Please recycle when ever possible.

SET-UP PRECAUTIONS

Please be sure to make any connections before plugging the CD player in to an electrical outlet. All fader and volume controls should be set to zero or minimum position, before the CD player is switched on. If the CD player has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the CD player immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.

Operating Determinations:

When installing this CD player, please make sure that the device is not exposed or will not be exposed to extreme heat, moisture or dust!

Do not operate the CD player in extremely hot (more than 30°/100°F) or extremely cold (less than 5°C/40°F) surroundings.

Keep the unit out of direct sunlight and away from heaters.

Operate the CD player only after becoming familiar with its' functions. Do not permit operation by persons not qualified for operating the unit. Most damages are the result of unprofessional opera- tion.

©American Audio® - www.americandj.com - Pro-Scratch 2™ Instruction Manual Page 6

Image 6
Contents Pro-Scratch Contents Important Information Do not open Risk of electric shockElectrical Safety Precautions Electrical PrecautionsSafety Instructions Line Voltage SelectionUnpacking Main Features SET-UP Checking the ContentsInstalling the Units ConnectionsGeneral Functions and Controls CUEGeneral Functions and Controls Pitch ON/OFF Button This button isRear Panel Figure Front Panel Figure 160 Basic Operations LOADING/EJECTING DiscsSelecting Tracks Auto CUE Pausing FigureStarting Playback Figure Stopping Playback Figures 11Setting and Storing a CUE Point Scanning Fast Forward / Fast ReverseStoring a Cue Point Creating and Playing a Seamless LoopEditing a Loop Using the Built In Sampler To create a sampleChanging the Sample Parameters Creating a BOP Effect Press the PLAY/PAUSE ButtonFlash Start Buttons Changing the Time Display 52, 53, & 54/TIME BARClear ALL Memory System MemoryRecall Flash Memory Firmware Version DisplayPitch Adjustments Pitch AdjustmentsPitch Slider Pitch Bending Pitch Bend Buttons 28JOG Wheel BUILT-IN Effects More than onceBUILT-IN Effects Parameters Effects FX MIX Step TWO Select the FX MIX Button 13 to activate the FX Mix Touch Sensitive JOG Wheel Flip -FLOP FLIP-FLOPYear Limited Warranty Specifications General