System Memory, Recall Flash Memory | American Audio Pro-Scratch 2

BASIC OPERATIONS (CONT.)

16. SYSTEM MEMORY:

		OFF
POWER		ON
1	2	3	4	5	6	7	8	9	0
PARAMETER TIME						CUE
SINGLE
	LOOP
RELOOP									T

PARAMETER RATIO

PROGRAM NONSTOP AUTO CUE BPM ELAPSED TOTAL REMAIN BEAT SYNC.

M S F

KEY

LOCK

EJECT

BPM

PITCH

The Pro-Scratch 2 comes with an incredible memory system. The Pro-Scratch 2™ can memorize virtually every customized setting for a particular CD. The unit can memorize all customized effect parameters, cue points, and samples used on a particular disk. To store all your setting for a CD, press and hold down the MEMORY BUTTON (9) for at least one second. When the memory has been stored properly the MEMORY LED (9) will turn off. The memory is full the RED outline of the MEMORY BUCKET (56) in the LCD (19) will disappear.

OFF

POWER ON

SCRATCH FILTER HOLDECHO TRANS

SKID

PHASE

FLANGER

PAN

BOP

MIX

ENTER

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

PARAMETER TIME

PARAMETER RATIO

1 2 3 4 5 6	7 8 9 0	PROGRAM	NONSTOP		AUTO
	CUE	ELAPSED	TOTAL REMAIN		CUE BPM	KEY
	CUE	ELAPSED	TOTAL REMAIN		BEAT SYNC.	LOCK
SINGLE
LOOP						BPM
RELOOP	T	M	S	F		PITCH
SCRATCH	FILTER		HOLD		ECHO	TRANS

SKID	PHASE				FLANGER	PAN

BOP

MIX

ENTER

EJECT

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

Figure 38

17. RECALL FLASH MEMORY:

The Pro-Scratch 2 can store all your user programmed cue points and effect parameters in to memory. These setting may be recalled at any time, even when a disc has been removed and reinserted at a later time. To recall the memory on a specific disk; 1) Be sure a CD is not inserted in to the drive. 2) Press the MEMORY BUTTON (9) down until the red memory LED turns on. 3) Insert the CD. "RECALL" will appear in the LCD (19) while the memory is being installed and the red MEMORY BUTTON (9) led will turn off.

Figure 39

18. CLEAR ALL MEMORY:

You may clear the system memory at any time. This will erase all your programmed memory and restore the unit to it's default settings. To clear the memory; While main power is turned off, turn the SEARCH WHEEL (5) in a clockwise direction. While the search wheel is turned in a clockwise direction turn main power on. The LCD

(19)will flash three times and default memory will be restored.

19. FIRMWARE VERSION DISPLAY:

You may display the units firmware version. Firmware is the units internal programming code. To view the firm- ware version; While main power is turned off, turn the SEARCH WHEEL (5) in a clockwise direction. While the search wheel is turned in a clockwise direction turn main power on. "VR XX XX" will briefly appear in the LCD (19), where XX XX will be replaced with firmware version.

19. SYSTEM LOCK:

This unit comes with a built-in lock feature. The lock features allow the system controls to be completely locked out in any mode. For example locking the unit while in play mode will turn off all other functions and the unit will remain in play mode until the lock is turned off, locking the unit when it is cue mode will turn all control off so nothing will function on the unit. The lock features prevents unwanted hands from changing any setting to the unit if the DJ has to walk away from the unit (aka bathroom or beer break). To lock the system Press and hold down the parameter time button for at least one second, release the parameter time button and tap the MEMORY BUTTON (9) once. If the unit was lock suc- cessfully "LOCK" will display in the LCD (19). To unlock the unit repeat the same

process or turn the unit off.

Figure 40

	OFF
POWER	ON
	1 2 3 4 5 6	7 8 9 0	PROGRAM	NONSTOP		AUTO
PARAMETER TIME		CUE	ELAPSED	TOTAL REMAIN		CUE BPM	KEY
PARAMETER TIME		CUE	ELAPSED	TOTAL REMAIN		BEAT SYNC.	LOCK
	SINGLE
	LOOP						BPM
	RELOOP	T	M	S	F		PITCH

PARAMETER RATIO
SCRATCH	FILTER	HOLD	ECHO	TRANS
SKID	PHASE		FLANGER	PAN

BOP

MIX

ENTER

EJECT

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH