Conversion KIT

This conversion kit shall be installed by a qualiﬁed service agency in accordance with the manufacturer’s instructions and

6.Using a deep 9/16” socket wrench, remove the main burner oriﬁ ce. A 7/8” back-up wrench must be used on the manifold, located below the housing to ensure that the aluminium tubing does not twist or kink. Replace the burner oriﬁ ce supplied using pipe thread compound.

all applicable codes and requirements of the authority having jurisdiction. If the information in these instruction is not followed exactly, a ﬁre, explosion or production of carbon monoxide may result causing property damage, per- sonal injury or loss of life. The qualiﬁed service agency is responsible for the

7. Remove the burner hood
from the pilot assembly by
pulling vertically. Use a
5/32” allen key to unscrew
the injector. Replace the
pilot injector with the one
supplied. Replace the pilot
hood onto the assembly
ensuring key position for	Fig. 3	SIT
proper alignment.	Fig. 3	SIT

PILOT

HOOD

PILOT

INJECTOR

proper installation of this kit. The instal- lation is not proper and complete until the operation of the converted appliance is checked as speciﬁed in the owner in- structions supplied with the kit.

1.“CAUTION” Before proceeding with conversion, the gas supply must be shut off prior to disconnecting the electric

power.Fig.1

8.Before replacing the burner assembly, adjust the burner shutter opening to 1/2” for propane and 1/16” for natural gas.

9. Replace and re-secure the burner assembly, ensuring that the venturi ﬁ ts over the burner oriﬁ ce.

10. To convert the main valve to the desired fuel, follow the

instructions that are supplied with the SIT regulator assembly

kit.

11. The conversion data label must be ﬁ lled out and attached

2. Remove the

optional front by

lifting it up and

away from the front

of the ﬁ replace.

(Fig. 1)

3. Remove the

glass door by

pulling the two

latch handles

located along the

top front edge

forward and then

lift the hook out

from the slot in

the door frame,

to release the

top of the door.

Next, pivot the

door forward

until the top

edge of the door

clears the front

of the ﬁ replace.

Grip the sides of

Latches

Glass Door

Optional Front

BURNER

CONTROL PANEL BASE

CONTROL PANEL

SEE-THRU

BURNER ELECTRODE

BOTTOM BOX

adjacent to the valve.

12. Turn on the gas supply and check for gas leaks by brushing

on a soap and water solution. Do not use open ﬂame.

13. Refer to page 28 for min and max pressures and

instructions for checking proper pressures. Replace the front

portion of the air deﬂ ector and install the logs.

14. Then light the pilot and main burner to ensure that the

gas lines have been purged and that the ﬁreplace is operating

properly at 26,000 BTU’s for both fuels.

15. Re assemble the remaining components & turn on the

electrical supply to the ﬁ replace.

Purge all gas lines with the glass door open.

Assure that a continuous ﬂow is at the burner before closing the door.

the door & lift the

door out from the

retainer along

the bottom. (Fig.

CURVED

DECORATIVE

PANEL

BURNER

(AA Battery Required)

4.Remove the control panel cover. (Fig. 2)

5.Remove the bowl and rockset exposing the pilot assembly.

W415-0583 / B / 05.23.07

GD82NT-T, GD82PT-T specifications

The Napoleon Fireplaces GD82PT-T and GD82NT-T are exquisite additions to any modern home, designed to combine style, efficiency, and advanced technology in one compact unit. These gas fireplaces offer remarkable features that cater to both aesthetic and functional needs, making them an ideal choice for homeowners seeking to enhance their living spaces.

At the heart of the GD82PT-T and GD82NT-T is Napoleon’s innovative burner technology. They utilize a unique PHAZER log set and glowing ember bed, creating a realistic flame effect that captures the essence of a traditional wood-burning fireplace while utilizing the convenience of gas. The stunning lifelike flames dance over the logs, providing ambiance and warmth that transforms any room into a cozy retreat.

One of the standout features of these models is their efficiency. Both the GD82PT-T and GD82NT-T are designed to provide substantial heating output while maintaining a high efficiency rating. The advanced heat distribution system ensures that warmth is evenly spread throughout the room, delivering comfort during colder months without excessive energy consumption.

In addition to their heating capabilities, these fireplaces come with Napoleon's patented Easy Clean glass, which helps minimize soot and residue build-up. This feature not only ensures a clearer view of the flames but also simplifies maintenance, allowing homeowners to enjoy their fireplaces without the hassle of frequent cleaning.

Another notable characteristic of the GD82PT-T and GD82NT-T is their customizable design options. Homeowners can choose from a variety of styles, including contemporary to traditional, with multiple finishes to ensure a perfect match with their existing décor. This versatility allows these fireplaces to seamlessly integrate into any living space while making a bold design statement.

Furthermore, the fireplaces come equipped with a remote control that allows users to adjust the flame height, thermostat settings, and other features with ease. This convenience enhances the overall user experience, providing the ultimate atmosphere at the touch of a button.

Safety is paramount, and Napoleon has incorporated several features to ensure peace of mind. These include an automatic shut-off system and a protective screen barrier, safeguarding against accidental contact with the hot glass.

Overall, the Napoleon Fireplaces GD82PT-T and GD82NT-T are exemplary choices for anyone seeking a perfect blend of beauty, efficiency, and technology. With their innovative design and advanced features, they stand out as premier options in the gas fireplace market, making them worthy investments for comfort and style in any home.