Napoleon Fireplaces GD82PT-T, GD82NT-T manual Trouble Shooting Guide, Symptom Problem Test Solution

Page 28

28

TROUBLE SHOOTING GUIDE

BEFORE ATTEMPTING TO TROUBLESHOOT, PURGE YOUR UNIT AND INITIALLY LIGHT THE PILOT AND THE MAIN BURNER WITH THE GLASS DOOR OPEN.

SYMPTOM

PROBLEM

TEST SOLUTION

 

 

 

Main burner fl ame

Blockage in vent.

- remove blockage. In really cold conditions, ice buildup may occur on

is a blue, lazy,

 

the terminal and should be removed as required.

transparent fl ame.

 

 

Incorrect installation.

- refer to Figure 13 to ensure correct location of storm collars.

Flames are consis- tently too large or too small. Carbon- ing occurs.

Unit is over-fi red or under- fi red.

BA

- check pressure readings:

Inlet pressure can be checked by turning screw (A) counter-clockwise 2 or 3 turns and then placing pressure gauge tubing over the test point. Gauge should read 7” (minimum 4.5”) water column for natural gas or 13” (11” minimum) water column for propane. Check that main burner is operating on “HI”.

Outlet pressure can be checked the same as above using screw (B). Gauge should read 3.5” water column for natural gas or 10” water col- umn for propane. Check that main burner is operating on “HI”.

AFTER TAKING PRESSURE READINGS, BE SURE TO TURN SCREWS CLOCKWISE FIRMLY TO RESEAL. DO NOT OVER- TORQUE.

Leak test with a soap and water solution.

Carbon is being de- posited on glass, logs or combustion chamber surfaces.

Air shutter has become

-

ensure air shutter opening is free of lint or other obstructions.

blocked

 

 

 

 

 

Flame is impinging on the

-

check that the bowl and rockset are correctly positioned.

rocks or combustion cham-

-

open air shutter to increase the primary air.

ber.

- check the input rate: check the manifold pressure and orifi ce size as

 

specifi ed by the rating plate values.

- check that the door gasketing is not broken or missing and that the seal is tight.

- check that both 4” and 7” vent liners are free of holes and well sealed at all joints.

- check that minimum rise per foot has been adhered to for any hori- zontal venting.

White / grey film

Sulphur from fuel is being

-

clean the glass with a gas fi replace glass cleaner. DO NOT CLEAN

forms.

deposited on glass, logs or

GLASS WHEN HOT.

 

combustion chamber sur-

If deposits are not cleaned off regularly, the glass may become per-

 

faces.

manently marked.

Exhaust fumes

Fireplace is spilling.

- check door seal and relief fl ap seal.

smelled in room,

 

- check for chimney blockage

headaches.

 

- check that the paint curing process is complete

Pilot goes out when

System is not correctly

-

purge the gas line with the glass door open.

the gas knob is re-

purged.

 

 

 

leased.

 

 

 

 

Out of propane gas.

-

fi ll the tank.

The gas valve has

an interlock device

Pilot flame is not large

-

turn up the pilot fl ame.

 

which will not al-

enough

 

 

 

low the pilot burn-

Pilot flame is not engulfing the

- gently twist the pilot head to improve the fl ame pattern around the

er to be lit until

thermocouple.

thermocouple.

the thermocouple

Thermocouple shorting /

- loosen and tighten thermocouple.

has cooled. Allow

approximately 60

faulty.

-

clean thermocouple and valve connection.

seconds for the

 

-

replace thermocouple.

 

-

replace valve.

thermocouple to

 

 

 

 

 

cool.

Faulty valve.

-

replace.

W415-0583 / B / 05.23.07

Image 28
Contents Installation Operation Instructions Table of Contents Napoleon GAS Fireplace PRESIDENT’S Lifetime Limited Warranty General Instructions General InformationCare of Glass VentingVenting Lengths & AIR Terminal Locations Definitions TOP Exit / Horizontal TerminationElbow Vent Length Values HT + VT= 10.7 + 6 =16.7 VT = 4.2 x 6 = 25.2 ftSince both formulas are met, this vent confi guration is ac CeptableTOP Exit Vertical Termination TOP Vertical TerminationW415-0583 / B Installation Wall and Ceiling Protection Vertical Installation Horizontal InstallationHorizontal AIR Terminal Installation Using Flexible Vent ComponentsVertical AIR Terminal Installation Using Rigid Vent Components Vertical Venting InstallationExtended Horizontal AIR Terminal Installation Fireplace Vent ConnectionMobile Home Installation GAS InstallationRestricting Vertical Vents Framing Clearance to CombustiblesHard Wiring Connection Electrical SchematicElectrical Connection Mantle ClearancesFinishing / Servicing Blower Replacement Burner Base RemovalBattery Replacement Remove the optional front. Instructions on PgNight Lighttm Replacement Operation / MaintenanceTime OUT Fireplace OperationHand Held Remote Operations Flame HeightAddress Setting Procedure DIP Switch Number 0 = on / 1 = OFF Operating Instructions What to do if YOU Smell GASLighting Instructions To Turn OFF GASAdjustments MaintenancePilot Burner Adjustment Venturi AdjustmentConversion KIT Replacements 000 Trouble Shooting Guide Symptom Problem Test SolutionStanding Main Pilot goes out while Gas piping is undersizedBurner is in ‘OFF’ Supply working pressure Position Fireplace Service History W415-0583 / B
Related manuals
Manual 32 pages 46.04 Kb

GD82NT-T, GD82PT-T specifications

The Napoleon Fireplaces GD82PT-T and GD82NT-T are exquisite additions to any modern home, designed to combine style, efficiency, and advanced technology in one compact unit. These gas fireplaces offer remarkable features that cater to both aesthetic and functional needs, making them an ideal choice for homeowners seeking to enhance their living spaces.

At the heart of the GD82PT-T and GD82NT-T is Napoleon’s innovative burner technology. They utilize a unique PHAZER log set and glowing ember bed, creating a realistic flame effect that captures the essence of a traditional wood-burning fireplace while utilizing the convenience of gas. The stunning lifelike flames dance over the logs, providing ambiance and warmth that transforms any room into a cozy retreat.

One of the standout features of these models is their efficiency. Both the GD82PT-T and GD82NT-T are designed to provide substantial heating output while maintaining a high efficiency rating. The advanced heat distribution system ensures that warmth is evenly spread throughout the room, delivering comfort during colder months without excessive energy consumption.

In addition to their heating capabilities, these fireplaces come with Napoleon's patented Easy Clean glass, which helps minimize soot and residue build-up. This feature not only ensures a clearer view of the flames but also simplifies maintenance, allowing homeowners to enjoy their fireplaces without the hassle of frequent cleaning.

Another notable characteristic of the GD82PT-T and GD82NT-T is their customizable design options. Homeowners can choose from a variety of styles, including contemporary to traditional, with multiple finishes to ensure a perfect match with their existing décor. This versatility allows these fireplaces to seamlessly integrate into any living space while making a bold design statement.

Furthermore, the fireplaces come equipped with a remote control that allows users to adjust the flame height, thermostat settings, and other features with ease. This convenience enhances the overall user experience, providing the ultimate atmosphere at the touch of a button.

Safety is paramount, and Napoleon has incorporated several features to ensure peace of mind. These include an automatic shut-off system and a protective screen barrier, safeguarding against accidental contact with the hot glass.

Overall, the Napoleon Fireplaces GD82PT-T and GD82NT-T are exemplary choices for anyone seeking a perfect blend of beauty, efficiency, and technology. With their innovative design and advanced features, they stand out as premier options in the gas fireplace market, making them worthy investments for comfort and style in any home.