Regency I31-LPG3 installation manual Manual, Please Keep These Instructions For Future Reference

Page 1

Owners & Installation

Manual

I31-3 Gas Inbuilt

Model: I31-NG3

I31-LPG3

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

LISTINGS AND CODE APPROVALS

These gas appliances have been tested in accordance with AS4553-2000, NZS 5262 and have been certified by the Australian Gas Association for installation and operation as described in these Installation and Operating Instructions.

Your unit should be serviced annually by an authorised service person.

WARNING:

Improper installation, adjustment, altera- tion, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional infor- mation consult an authorised installer, serv- ice agency or the gas supplier.

FOR YOUR SAFETY

Do not store or use gasoline or other flamma- ble vapours and liquids in the vicinity of this or any other appliance.

Installation and service must be performed by an authorised installer, service agency or the gas supplier.

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appli- ance

Do not touch any electrical switch: do not use any phone in your building.

Immediately call your gas supplier from a neighbour's phone. Follow the gas sup- plier's instructions.

If you cannot reach your gas supplier, call the fire department.

918-001b

06/01/07

Image 1
Contents Please Keep These Instructions For Future Reference ManualRegency GAS Fireplace Inbuilt Fireplace Table of Contents Data Badge Installation GAS Connection Minimum Fireplace DimensionsMinimum Clearances to Combustibles Draft Diverter Connection DiagramFlueing GAS Pressure TestOptional Brick Panel LOG SET InstallationVermiculite Embers PinCutout Pins on Rear Log SupportNotch Cutout Per instructions in this manualFlush Front Installation Faceplate & Trim InstallationDiagram Rear View Trim Assembly BAY Louvres BAY Front InstallationFlush Louvres AustraliaSwitch Box Assembly Boss on rear left side Piece Hampton Cast Faceplate InstallationEnsure that the top Sides are Aligned Side Hook Slots Hampton Cast Grill InstallationRegency Logo Left Hand Side Faceplate Grill Stop BracketClose louver Barossa Curved Front InstallationWiring Optional Remote ControlOptional Wall Thermostat Operating Instructions Copy of Lighting Instruction Plate Maintenance InstructionsPilot Flame Gas Control ValveLOG Replacement Door Glass MaintenanceGOLD-PLATED Trim Glass Gasket FAN MaintenanceReplacing fan Remove the 2 screws holding Grate in positionSymptom Probablecause Correctiveaction Trouble Shooting Regency GAS Space HeaterMain Assembly Parts ListDescription Burner Assembly & LOG SET Faceplate Assembly Bay Door BAY & Flush Front AssemblyFlush Door Hampton Cast Faceplate Assembly Regency I31-3 Gas Fireplace Inbuilt Western Australia Eastern Australia Warranty