Installation / Assembly
1.Remove the transformer and the metal screws from the plastic bag.
2.Place the grill on a sturdy surface and tilt it back to show the underside of the grill.
3.Using the metal screws, attach the transformer to the left side of the grill near the internal electrical connection. Attach the metal plate to the outside surface of the grill as shown in the figure below.
4.When you have firmly tightened the screws and nuts, connect the plug from the transformer to the grill. Screw on the stainless steel retainer.
Installing Grills in Barbecue Islands
Page 6 | Cal Flame 2008 Owner’s Manual |
LTR20081044, Rev. A