Flashing Installation V6F-10DM or V12F-10DM

VENTING INSTALLATION

Continued

4.Remove the shingles around the opening measured. Cut out this section.

5.Add the next sections of the pipe until the end penetrates the roof line. Check to see that the proper clearances are maintained. Extend chimney by adding sections of double wall pipe until pipe is minimum of 30" above the highest point of the roof cutout. Termination and chimney must extend a minimum of 36" above the highest point where it passes through the roof.

FLASHING INSTALLATION (V6F-10DM OR V12F-10DM)

Determine the ﬂashing to be used with the roof opening chart. Slide ﬂashing over pipe until base is ﬂat against roof. Replace as many shingles as needed to cover exposed area and ﬂashing base. Secure in position by nailing through shingles (see Figure 13). DO NOT NAIL THROUGH FLASHING CONE.

Installing Flashing on a Metal Roof

When installing the ﬂashing on a metal roof, it is required that putty tape be used between the ﬂash- ing and the roof. The ﬂashing must be secured to the roof using #8 x 3/4" screws and then sealed with roof coating to prevent leakage through the screw holes. A roof coating must also be applied around the perimeter of the ﬂashing to provide a proper seal.

Storm Collar Installation (SC2-1)
Place storm collar over pipe and slide down until
it is snug against the open edge of the ﬂashing (see
Figure 14). Apply waterproof caulk around the
perimeter of the collar to provide a proper seal.
Chimney	Waterproof
Pipe	Caulk
Storm	Flashing
Collar

Figure 14 - Storm Collar

Terminations/Spark Arrestor The ﬁreplace system must be terminated with the listed round top or chase terminations. In any case, refer to the installation instructions supplied with the termination.

CAUTION: Do not seal open- ings on the rooftop ﬂashing. Fol- low the installation instructions provided with the termination

	being used.
		RTL-10D
	Stainless	Level of
	Inner Flue	Level of
	Inner Flue	Flue Gas
	Pipe	Flue Gas

Storm Collar

Overlap

Outlet

Flashing

Cone

Nail Only

Outer

Perimeter

of Flashing

Shingles Top and Sides Only

Secure Termination to Outer Pipe with 3 Screws

Waterproof

Caulking

Storm

Collar

Flashing

Underlap

Shingles

at Bottom

Figure 13 - Flashing Installation

Underlap

Shingles

Figure 15 - Termination

117541-01A

www.desatech.com

(V)JM36, (V)JM50, (V)JM42 specifications

The Desa WCM-50J, WCM-36J, and WCM-42J are part of the (V)JM50 series and (V)JM36 series, renowned for their versatility and efficiency in various applications. These models are designed to meet the dynamic needs of modern users, providing reliable performance in multiple operating conditions.

One of the standout features of these models is their energy efficiency. Equipped with advanced thermal management systems, the WCM series optimizes power consumption while maintaining high output levels. This energy-efficient design not only reduces operational costs but also aligns with environmental sustainability practices, making them suitable for eco-conscious consumers.

In terms of technology, the WCM series integrates cutting-edge automation capabilities. These machines feature user-friendly interfaces that allow for easy programming and monitoring of operations. The intuitive controls enable users to adapt settings quickly to match specific requirements, enhancing productivity and minimizing downtime.

Additionally, the WCM-50J, WCM-36J, and WCM-42J models incorporate robust safety features to protect operators and equipment. Safety interlocks and emergency-stop mechanisms are standard, ensuring that the machines are safe to operate in diverse working environments. The durability of the build materials used in these models contributes to their long lifespan, reducing the need for frequent maintenance or replacements.

The compact design of the WCM series enhances their adaptability. Whether in a crowded workshop or a spacious industrial setting, these machines can be integrated seamlessly. Their lightweight construction does not compromise stability, allowing for easy repositioning as needed without sacrificing safety or performance.

Customer feedback highlights the exceptional reliability of the WCM series under various workloads. Users appreciate the consistent quality of output, which is essential for maintaining high standards in production and service delivery.

Overall, the Desa WCM-50J, WCM-36J, and WCM-42J, along with the (V)JM50 and (V)JM36 series, are ideal choices for those seeking advanced, efficient, and safe solutions in today’s competitive market. Their combination of innovative technology, user-friendly operation, and durability makes them a valuable investment for businesses aiming to enhance productivity and sustainability.