OWNER’S MANUAL
VENTING INSTALLATION
Continued
HIGH ALTITUDE
INSTALLATION
Your Vanguard
When installing this fireplace at an elevation above 2000 feet (in the USA), you may need to decrease the input rating by changing the existing burner orifice to a smaller size. Re- duce input 4% for each 1000 feet above sea level. Check with your local gas company for proper orifice size identification.
When installing this fireplace at an eleva- tion above 4500 feet (in Canada), check with local authorities.
Consult your local gas company to help de- termine the proper orifice for your location.
For assistance with any high altitude instal- lation contact DESA International’s Tech- nical Service Department at
PARTS LISTS FOR VENTING KITS AND COMPONENTS
Vanguard Rigid Venting
Number Description
BGFVK Basic Ground Floor Rigid Vent Kit
Includes: 7" x 60° Elbow, Extended
Adjustable Horizontal Termination,
Wall Thimble and 14 Screws
GFVK Ground Floor Rigid Vent Kit
Includes: 7" x 60° Elbow, 7" Adjust- able Galvanized Coaxial Pipe
BVK Basement Rigid Vent Kit
Includes: 7" x 30° Elbow, 7" x 4' Galvanized Pipe, 7" x 90° Elbow, 7" Adjustable Galvanized Pipe
CVK Corner Vent Kit
Includes: 7" x 30° Elbow, 7" x 90° Elbow, 7" Adjustable Galvanized Pipe
Vanguard Rigid Venting (Cont.)
Number Description
SVK | Snorkel Rigid Vent Kit |
| Includes: 7" x 30° Elbow, 7" x 4' |
| Galvanized Pipe, 7" x 90° Elbow, 7" |
| Adjustable Galvanized Pipe |
| Wall Thimble, 36" Snorkel Termi- |
| nation, RTV Silicone and 28 Screws |
RVF | Roof Rigid Vent Kit |
| Includes: Flue Restrictor, Storm |
| Collar, 7" x 30° Elbow, 7" x 4' |
| Galvanized Pipe, 7" x 2' Galva- |
| nized Pipe, 7" Adjustable Galva- |
| nized Pipe |
| port, Roof Flashing, RTV Silicone, |
| Vertical Termination, and 26 screws |
D1000 | 7" x 12" Galvanized Coaxial |
| Pipe(6 pcs.) |
D1010 | 7" x 24" Galvanized Coaxial |
| Pipe(6 pcs.) |
D1020 | 7" x 48" Galvanized Coaxial |
| Pipe(6 pcs.) |
D1030 | 7" Adjustable |
| Galvanized Coaxial Pipe |
| (6 pcs.) |
D1050 | 7" x 6" Galvanized Coaxial Pipe |
| (6 pcs.) |
D2000 | 7" x 90° Elbow (6 pcs.) |
D2010 | 7" x 45° Elbow (6 pcs.) |
D2020 | 7" x 30° Elbow (6 pcs.) |
D2030 | 7" x 60° Elbow (6 pcs.) |
D3000 | Wall Strap/Offset Support |
| (6 pcs.) |
D3010 | Storm Collar (6 pcs.) |
D3020 | Wall Thimble (6 pcs.) |
D3040 | Vertical Vent Termination Cap |
D3050 | Vertical Restrictor (6 pcs.) |
D3060 | Ceiling Firestop/Support (6 pcs.) |
D3070 | Rectangular Horizontal Rigid |
| Vent Termination Cap |
D3090 | Cathedral Ceiling Support Box |
D4000 | Roof Flashing |
D4010 | Roof Flashing |
D5000 | Vinyl Siding Standoff (6 pcs.) |
Vanguard Flexible Venting
Number Description
BFGFVK Basic Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 2' Flex- ible Pipe, 4" x 2' Flexible Pipe, Wall Thimble, Horizontal Termination, (2) Spacer Springs,
(2)4" Hose Clamps, (2) 7" Hose Clamps, and 10 Screws
Vanguard Flexible Venting (Cont.)
Number Description
FGFVK Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 4' Flex- ible Pipe, 4" x 4' Flexible Pipe, Wall Thimble, Horizontal Termination,
(4)Spacer Springs, (2) 4" Hose Clamps, (2) 7" Hose Clamps, RTV Silicone, and 10 Screws
D1040 7" x 25' Coaxial Flex Pipe with Spacer Springs
D3080 Rectangular Horizontal Flex
Termination Cap
D4020 Flex Connector (6 pcs.)
D4030 Flex Wall Thimble (6 pcs.)
D4040 4" Hose Clamp (6 pcs.)
D4050 7" Hose Clamp (6 pcs.)
SIMPSON DURA-VENT GS 4" x 6 5/8 "
Number Description
Available from DESA International:
SD2040 Simpson
SD2050 Simpson
Available from Simpson Dura-Vent Only:
9027" x 48" Pipe
9037" x 36" Pipe
9047" x 24" Pipe
9067" x 12" Pipe
9077" x 9" Pipe
9087" x 6" Pipe
9117" Adjustable
940Wall Thimble
941Cathedral Ceiling Support Box
943Roof Flashing
943S Roof Flashing
9457" x 45° Elbow
950Vinyl Siding Standoff
953Storm Collar
963Ceiling Firestop
98136" Snorkel Termination
984Horizontal Termination Vent Cap
988Wall Strap
9907" x 90° Elbow
991Vertical High Wind Termination
105453 | 15 |