Hearth and Home Technologies Montana-36, Montana-42 operating instructions Grate, Firescreen

Page 22

MONTANA INSTALLATION INSTRUCTIONS

3.Glass Doors

Most efficient fireplace operation using glass doors is with the doors open. When the doors are open, the screen must be closed. Only Hearth Technologies Inc. glass doors may be used. See Figure 24 for proper glass door operation.

Figure 24

Proper Operating Positions of Bi-Fold Doors

4.Grate

The factory installed integral grate must be used to hold the logs from falling out of an open fireplace and to allow air to pass between the burning logs. It is important to keep the fire off the hearth and to allow the ashes to collect beneath the fire, thereby forming a layer of additional heat protection.

5.Firescreen

A firescreen is always provided to control sparks. It must be closed whenever the fireplace is in use. Glass doors or firescreens must not be used to hold burning material inside the fireplace. Only those glass doors specifically tested and listed for use with the specific fireplace model should be used. Screens should be closed when the glass doors are closed.

CAUTION:

When left closed while burning your fireplace, firescreens and glass doors will be HOT.

Handle with care!

WARNING!

Do not store fuel within the clearances to com- bustibles, or in the space required for refueling and ash removal. See maintenance instructions, “Clear Space Near the Fireplace”.

22

4039-150 Rev B

01/04

Image 22
Contents Installation & Operating Instructions MONTANA-36 and MONTANA-42 Outdoor Woodburning FireplaceTable of Contents Heat-N-Glo fireplace system consists of the following Listings and Code ApprovalsDescription of the Fireplace System Optional Components IncludeFireplace System Components Fireplace ComponentsChimney Components Catalog # DescriptionFirestop Spacer TR11T PRE-INSTALLATION Preparation Fireplace Locations and Space RequirementsFrame the Fireplace Construct an Outdoor EnclosureSidewalls/Surrounds Using Offsets and Returns Chimney RequirementsChimney Height Requirements above roof line Number of Sections RequiredPlace the Protective Metal Hearth Strips Installation of the FireplacePosition the Fireplace Level the FireplaceInstall Firestop Spacers Assemble Chimney Sections∅ 6. Attic Insulation Shield Double-check the Chimney AssemblySecure the Chimney System Install the Termination Cap Installing a TR11T Round Telescoping Termination CapInstall the Cooling Air Kit furnished Install the Chimney Air KitComplete the Enclosure Gas Log/Lighter ProvisionsHearth Extension Factory Built Hearth ExtensionMantel Position the Hearth ExtensionFinishing Material Glass DoorsMontana Installation Instructions Operating Instructions General Information Flue DamperGrate FirescreenWood Fuel Starting a Fire Disposal of Ashes Maintenance InstructionsChimney Cleaning Creosote and SootHomeowner’s Notes Index Warranty For HEAT-N-GLO Fireplaces