Broan 42-B, 42H-B owner manual Ground Wire

• Using two 3/4 in. wrenches, disconnect the burner supply B. Battery Replacement

tube. • Remove switch cover plate from the wall.

Figure 12.7 Disconnect Burner Supply Tube

Figure 12.9 Switch Cover Plate

•Remove the two screws securing the valve to the valve bracket.

Ground

Wire

Figure 12.8 Remove Valve from Valve Bracket

•Replace two D-cell battieres.

Figure 12.10 Batteries

•	Disconnect the pilot and orifice tubes using a 7/16 in. and	• Replace switch cover plate.
	a 5/8 in. wrench.
•	Reverse these steps to replace the gas valve. Make sure
	the ground wire is reattached as shown in Figure 12.8.

Heat & Glo LifeStyle Collection • Dakota 42-B/Dakota 42H-B • 4036-909 Rev D • 08/06 25