Vermont Casting 3405GT, 3605G, 3405GW, 3405BGW, 2505G, 3005G owner manual Able to rotate with

Page 10

Assembly Step 5

Locate these parts:

Damper

Plate

Hardware:

HARDWARE BAG C

10-24 Nut

10-24 Lock Washer

10-24 x 5/8” Bolt

1 Required

1 Required

1 Required

1.Turn the smoker upright.

2.Set the damper plate on top of the cabinet and line it up with the corresponding “butterfly” holes. One of the tabs will seat inside one of the holes.

3.Insert a bolt from the top through the center hole.

4.From the bottom side, place a lock washer and nut

on the bolt as shown.

5.Thread the nut just tight enough to keep the damper plate

snug. It should be

Lock Washer

able to rotate with

Nut

little resistance.

 

Tools needed:

Phillips Head

Screwdriver

3/8”

Wrench

Bolt

Damper

Cabinet Panel

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Gas Smoker Statement of Commitment Read ALL Instructions and Warnings LP Tank Not Included Assembly Identifying the parts Assembly Step Important One leg Control Panel Assembly Burner Assembly Able to rotate with Nuts Wood Chip Box Wood Box Lid Rack Water Pan Cooking Grids Feed the door handle into the hole Nameplate Push Nuts With Heat Indicator Hook Zip Tie Connecting the LP Tank Checking for Leaks Operating Instructions Adding Wood / Charcoal Lighting Procedure Igniter Lighting System
Top Page Image Contents