Vermont Casting 3405GW, 3605G, 3405GT, 3405BGW, 2505G, 3005G owner manual Burner Assembly

Page 9

Assembly Step 4

Locate these parts:

Burner

Assembly

Hardware:

HARDWARE BAG B

1/4-20 x 1/2” Bolts

3Required

1.Set the burner assembly onto the cabinet as shown. IMPORTANT: The burner tube must slide properly onto the valve stem as shown below.

2.Secure the burner assembly with the three bolts from the inside of the cabinet. Securely tighten the bolts.

3.Attach the loose igniter wire to the igniter on the control panel as shown below.

Tools needed:

Phillips Head

Screwdriver

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Gas Smoker Statement of Commitment Read ALL Instructions and Warnings LP Tank Not Included Assembly Identifying the parts Assembly Step Important One leg Control Panel Assembly Burner Assembly Able to rotate with Nuts Wood Chip Box Wood Box Lid Rack Water Pan Cooking Grids Feed the door handle into the hole Nameplate Push Nuts With Heat Indicator Hook Zip Tie Connecting the LP Tank Checking for Leaks Operating Instructions Adding Wood / Charcoal Lighting Procedure Igniter Lighting System
Top Page Image Contents