Vermont Casting 3605G, 3405GW, 3405GT, 3405BGW, 2505G, 3005G owner manual Hook Zip Tie

Page 16

Assembly Step 11

Locate these parts:

HARDWARE BAG G

S-Hook

Zip Tie

Tools needed:

Pliers

Using the zip tie, secure the hose to the front leg as shown. Do not pull the zip tie tight - leave it just loose enough so that the hose can be adjusted if needed.

Tying the hose to the leg helps prevent the hose from coming into contact with the hot burner chamber. Inspect the installation underneath the smoker to ensure that the hose is not rubbing any portion of the burner chamber.

Crimp

OR

1.Place one end of the S-Hook around the regulator neck or hose as shown.

2.Using a set of pliers, crimp the S-Hook securely to the HVR so that it can not be removed from the HVR.

3.When an LP tank is not attached to the smoker, use the S-Hook to hang the HVR from the carry handle on the side of the smoker. This will help prevent dirt and other particles from plugging the end of the HVR.

Assembly is now complete! Please follow all instructions and safeguards on the following pages for connecting the LP tank.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Gas Smoker Statement of Commitment Read ALL Instructions and Warnings LP Tank Not Included Assembly Identifying the parts Assembly Step Important One leg Control Panel Assembly Burner Assembly Able to rotate with Nuts Wood Chip Box Wood Box Lid Rack Water Pan Cooking Grids Feed the door handle into the hole Nameplate Push Nuts With Heat Indicator Hook Zip Tie Connecting the LP Tank Checking for Leaks Operating Instructions Adding Wood / Charcoal Lighting Procedure Igniter Lighting System
Top Page Image Contents