Vermont Casting 3605G, 3405GW, 3405GT, 3405BGW, 2505G, 3005G owner manual Important One leg

Assembly Step 2

Locate these parts:

4 Legs	Cabinet
	Assembly
Hardware:	HARDWARE BAG A

1/4-20 x 5/8” Bolts

16Required

1.Set the cabinet assembly top side down.

2.For each leg, line up the holes

and insert the bolts. Nuts are pre-welded to the cabinet.

IMPORTANT: One leg
contains an extra hole
on its side and must be	Leg with
mounted at the front in	extra hole
the position shown.
This hole will later be
used to secure the
gas hose to the leg
with a zip-tie.

3.DO NOT yet insert the two bolts in the locations indicated. These two bolts will be used in the next assembly step.

Tools needed:

Phillips Head

Screwdriver

7