Vermont Casting 3005G, 3605G, 3405GW, 3405GT, 3405BGW, 2505G Feed the door handle into the hole

Page 14

Assembly Step 9

 

Locate these parts:

 

Door Handle Kit

HARDWARE BAG E

 

 

 

 

 

 

 

 

Mounting

 

 

 

 

 

Bracket

 

 

 

 

 

1/4-20 x 3/8” Bolts

 

 

Handle Spring

 

and 1/4-20 Lock

 

 

 

Washers (2 ea)

 

 

Handle Washer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tools needed:

Phillips Head

Screwdriver

1.Slide the handle washer onto the end of the door handle, followed by the handle spring as shown.

1

2. Feed the door handle into the hole

 

through the front of the door panel.

3.From the back side of the door panel, insert the mounting bracket over the end of the handle as shown.

4.With lock washers placed on the bolts, insert the bolts through the mounting plate, into the pre-threaded mounts and firmly tighten the bolts.

2

3

4

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Gas Smoker Statement of Commitment Read ALL Instructions and Warnings LP Tank Not Included Assembly Identifying the parts Assembly Step Important One leg Control Panel Assembly Burner Assembly Able to rotate with Nuts Wood Chip Box Wood Box Lid Rack Water Pan Cooking Grids Feed the door handle into the hole Nameplate Push Nuts With Heat Indicator Hook Zip Tie Connecting the LP Tank Checking for Leaks Operating Instructions Adding Wood / Charcoal Lighting Procedure Igniter Lighting System
Top Page Image Contents