Vermont Casting 3605G, 3405GW, 3405GT, 3405BGW, 2505G, 3005G owner manual Nuts

Page 11

Assembly Step 6

Locate these parts:

2Carry Handles

Hardware:

HARDWARE BAG D

1/4-20 Nuts

1/4 Lock Washers

1/4-20 x 5/8” Bolts

8 Required

8 Required

8 Required

1.Line up the carry handle with the corresponding holes on the side of the cabinet as shown. The handles must be positioned upright with the bolt holes on the bottom as shown.

2.Insert the bolts from the outside and thread the lock washers and nuts from the inside of the cabinet.

3.Firmly tighten the nuts.

4.Complete steps for both sides of the cabinet assembly.

Tools needed:

Phillips Head

Screwdriver

7/16”

Wrench

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Gas Smoker Statement of Commitment Read ALL Instructions and Warnings LP Tank Not Included Assembly Identifying the parts Assembly Step Important One leg Control Panel Assembly Burner Assembly Able to rotate with Nuts Wood Chip Box Wood Box Lid Rack Water Pan Cooking Grids Feed the door handle into the hole Nameplate Push Nuts With Heat Indicator Hook Zip Tie Connecting the LP Tank Checking for Leaks Operating Instructions Adding Wood / Charcoal Lighting Procedure Igniter Lighting System
Top Page Image Contents