Aussie 6112S8X641 Step Side Tables to Cart Assembly, Model 6122 only Side Burner Valve Assembly

Page 14

14

Step 13

Side Tables to Cart Assembly

Attach the Left and Right Side Tables to the cart with 2) 1/4-20 x .39” Bolts and 1/4-20 Nuts each, first to the Front Side Table Support then second to the control panel end flange with 2) 1/4-20 x .39” Bolts. Last, install the 2) 1/4-20 x .79” Bolts at the rear supports. Attach one side table at a time. Install the front .39” bolts and nuts but do not tighten com- pletely. Install the .79” bolts through the rear supports into the rear U-leg. Tighten all Side Table fasteners securely.

Install these first

.79” Bolts at rear

1/4-20 x .39” Bolt

8 pcs

1/4-20 Nut

4 pcs

1/4-20 x .79” Bolt

4 pcs

.39” Bolts and Nuts at front

Step 13A (Model 6122 ONLY)

Side Burner Valve Assembly

Attach the Side Burner Valve to the inside of the left side table face. Insert the valve stem out through the large hole in the side table face and align the small holes. Insert 2) M4 x .31” bolts through the front of the side table face into the threaded holes in the valve bracket and tighten.

M4 x .31” Bolt

2 pcs

Image 14
Contents 6122S8X6416112S8X641 For Outdoor Household Use Only. Not for Commercial UseTools Required for Assembly Carbon Monoxide HazardContents Preparation for AssemblyParts Illustration Model 6122S8X641 Description Quantity Parts List- Model 6122S8X641Key Description Quantity Parts Illustration Model 6112S8X641 Parts List- Model 6112S8X641 Step Rear Leg Frame Assembly Assembly InstructionsStep Front Leg Frame Assembly Step Rear Crossbrace Assembly Step Cart Frame Assembly Step Side Table Support AssemblyStep Heat Shield Assembly Step Manifold and Piezo Igniter AssemblyStep Control Panel to Cart Frame Assembly Step Shroud AssemblyStep Shroud to Cart Assembly Step Wheel AssemblyStep Side Tables to Cart Assembly Model 6122 only Side Burner Valve AssemblyStep Bowl to Cart Assembly Step Drip Cup Wire AssemblyStep Main Burner Assembly Model 6122 only Side Burner Electrode Assembly Model 6122 only Side Burner AssemblyStep Main Burner Electrode Assembly Electrode Wire Plug AssemblyStep Hood Handle Assembly Step Hood/Hinge AssemblyStep Flavor Activator / Warming Rack Assembly Step Cooking Grid / Control Knob AssemblyCylinder Retainer Wire Assembly Step Cylinder Blocking Wire AssemblyDrip Cup Assembly StepLP Gas Cylinder Connecting/Disconnecting the GasUsing Gas Connecting LP Gas Cylinder LP Hose and RegulatorSelecting a Location Before Using Your LP Gas GrillInstallation Codes Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Lighting the Grill Using the Pulse-Spark Ignitor Check The FlameLighting the Grill Using the Piezo Ignitor Manual Lighting of the Grill onManually Lighting the Grill Manually Lighting the Side Burner Lighting the Side Burner Model 6122 OnlyManually Lighting the Side Burner Cooking On the Gas Grill Grill Cooking Direct MethodIndirect Cooking Roasting Roasting Indirect MethodDirect Cooking on the Grids Warming Rack End of Cooking SessionCare and Maintenance Cleaning the GrillHow to Clean the Burners Screw Storage Troubleshooting EmergenciesSee How to Clean Burners in Care and Maintenance Clean the Burners. See How to Clean Burners in CareMaintenance Problem Important NoticeLimited Warranty Meco Corporation Limited Warranty