Aussie 6122S8X641, 6112S8X641 manual Step Rear Crossbrace Assembly

9

Step 3

Rear Crossbrace Assembly

Attach Rear Crossbrace inside Rear Leg Frame with 4) 1/4-20 x .39” Bolts. Note: The flanges on the ends of the cross- brace tube are angled inward toward the top to match the angle of the legs.

1/4-20 x .39” Bolt

4 pcs

NOTE:

Threaded Insert on top

Rear

Crossbrace

Step 4

Bowl Supports, Cylinder Support and Side Crossbrace Assembly

Attach the Left and Right Bowl Supports, Clyinder Support and Crossbrace to rear leg assembly with 8) 1/4-20 x .39” Bolts. Note: Each part must be oriented as shown for proper assembly. Bolts should be snug but do NOT tighten com- pletely at this stage. Note: The flanges on the ends of the crossbrace tube are angled inward toward the top to match the angle of the legs.

1/4-20 x .39” Bolt

8 pcs

	Rear Leg Assembly
Left Bowl Support		Right	Side Crossbrace
Holes are closest to		Bowl Support
OUTSIDE edge

Left

Bowl

Support

Cylinder Support

Low side of raised area to center

Rear Leg

Assembly

Holes in Bowl Support align with leg

NOTE:

notches closest together to outside

Rear Leg Assembly