Aussie 6122S8X641, 6112S8X641 manual Step Cylinder Blocking Wire Assembly, Drip Cup Assembly

21

!WARNING

To reduce the risk of serious bodily injury or death from fire or explosion:

Never remove guards or devices to prevent storage of spare or oversize LP Gas Cylinders not recommended for this grill.

Step 24

Cylinder Blocking Wire Assembly

Attach the Cylinder Blocking Wire to the cart with 2) 5/32 x .47” Bolts.

5/32 x .47” Bolt

2 pc

Cylinder Blocking Wire

		Step 25
A		A. Drip Cup Assembly
		Insert the Drip Cup into the hanger wire
	B	underneath the grill bowl.

B. Cylinder Retainer Wire Assembly

Position the Cylinder Retainer Wire as shown. Insert the legs of the retainer wire into the holes in the legs just below the joint. Allow wire to drop into position, curve toward the center of the cart and parallel to the floor.

This Completes the Grill Assembly.

NOTE: Verify ALL hardware is tightened Securely.