Aussie 6122S8X641, 6112S8X641 manual Model 6122 only Side Burner Electrode Assembly

17

Step 17 (Model 6122 ONLY)

Side Burner Electrode Assembly

A. Insert small end of Electrode Wire down through hole in Side Table until metal tab with hole is seated over small threaded hole.

B. Fasten Electrode in place to side table with 1) 5/32 x .39” Bolt and 5/32-30 Nut.

B

5/32 x .39” Bolt

5/32-30 Nut

1 pc each

A

Step 18 (Model 6122 ONLY)

Side Burner Assembly

A. Insert tube of Side Burner down through center hole in Side Table until metal tab with hole is seated over small threaded hole.

B. Before bolt is inserted, verify that valve nozzle is properly inserted into the end of the burner tube. End of tube will rest loosely against bend in valve. (Regulator hoses not shown for clarity)

C. Fasten Burner in place with 1) 5/32 x .39” Bolt.

D. Plug end of side burner electrode on to tab on SIDE of Piezo igniter body.

5/32 x .39” Bolt

1 pc

A

B

C

D

C