Aussie 6804, 6805 manual How to Clean the Burners

Page 31

31

In order to prevent flashbacks, the Burner(s) should be removed from the grill and cleaned periodically, especially if the grill has been stored for an extended period of time.

 

 

Valve

 

Control Knob

Burner

 

 

 

 

Spider webs or nest

Fig. 15

 

inside Venturi Tube

 

 

Venturi Tube

How to Clean the Burners

1.Make sure the Control Knobs are turned “Off” and the grill is completely cooled.

2.Carefully remove Cooking Grids and Flame Diffusers.

3.To remove each Main Burner, first remove the nut & bolt that fastens the burner flange to back wall. (Fig. 16) Leave Side Burner in place.

4.Slide each Main Burner toward the grill front to disengage tab at rear of burner from slot in back wall of bowl. Gently lift the rear of the Burner. (Fig. 17) Slide the Burner towards the grill back to move the Venturi Hole off of the Valve nozzle. (Fig. 18) Lift each Main Burner from the grill.

Remove nuts and bolts.

Fig. 16

View from inside front body

Valve nozzle

Fig. 18

Fig. 17

Lift Burner up and out.

Burner Venturi Hole fits centrally around Valve nozzle.

Image 31
Contents For Outdoor Household Use Only. Not for Commercial Use 68046805Carbon Monoxide Hazard Tools Required for Assembly Supplied with GrillPreparation for Assembly ContentsBox Description Packing List- ModelPacking List- Model Step Caster Assembly Assembly InstructionsStep Cabinet Bottom Assembly Step Side Panel Assembly Step Cabinet Upright Assembly Step Front Crossbar AssemblyStep Step Cylinder Guard AssemblyCylinder Blocking Wire Assembly Center Wheel Assembly Model Door Handle AssemblyDrawer Positioning Step Drawer AssemblyStep Hood/Body To Cart Assembly Step Door AssemblyStep Side Table Assembly Side Burner Valve Connection Side Burner Valve AssemblyStep Side Burner Control Knob Assembly Step Side Burner Igniter Wire ConnectionSide Burner Grid Assembly Foil Pan/Grease Pan Assembly Step Bottom Body Panel AssemblyStep Warming Rack Assembly Step Battery in Igniter Installation Step Flame Diffuser/Cooking Grid AssemblyUsing Gas Connecting/Disconnecting the GasLP Gas Cylinder LP Hose and Regulator Connecting LP Gas CylinderPerforming a Leak Test Before Using Your LP Gas GrillInstallation Codes Selecting a LocationHow to Perform a Leak Test First Time USE and as required Model Off position Lighting the Grill Using the Pulse-Spark IgnitorManual Lighting of the Grill on Lighting the Side Burner Sear Burner or Rotisserie BurnerManually Lighting the Grill Check The Flame Lighting the Side BurnerManually Lighting the Side Burner Manually Lighting the Side Burner Grill Cooking Direct Method Cooking On the Gas GrillDirect Cooking on the Grids Roasting Indirect MethodIndirect Cooking Roasting End of Cooking Session Warming RackCleaning the Grill Care and MaintenanceHow to Clean the Burners Open up Storage Emergencies TroubleshootingSee How to Clean Burners in Care and Maintenance Rises up while filling Then stops when fullParts Illustration- Model Key Description Quantity Parts List- ModelParts Illustrations- Model Meco Corporation Limited Warranty Limited Warranty