Aussie 6804, 6805 manual Storage

Page 33

33

Storage

!WARNING

To reduce the risk of serious bodily injury or death:

Store your LP gas grill in a cool dry place. Do not store an LP Gas Cylinder in a space greater than 125 degrees Fahrenheit. Never store a connected LP Gas Cylinder in a building, garage, or any enclosed area.

Store LP Gas Cylinders outdoors out of reach of children.

Never store an LP Gas Cylinder indoors (empty or filled) unless it is disconnected from the gas grill and the cylinder’s Gas Supply is turned “OFF.”

Never leave an LP Gas Cylinder inside a vehicle that can become overheated by the sun.

Even though your LP Gas Cylinder may appear to be empty, gas may still be present and the LP Gas Cylinder should be transported and stored accordingly.

Never store a spare LP Gas Cylinder under or near the LP gas grill.

Always turn off the LP Gas Cylinder at the LP Gas Cylinder valve when the gas grill is not in use.

1.Disconnect LP Gas Cylinder from grill and store outside, in a dry, well-ventilated area, away from any sources of heat or ignition. Re-cap LP Gas Cylinder valve with the Safety Cap.

2.Remove Burners and wrap with aluminum foil to prevent insects from entering the Burner holes. Store wrapped Burners on top of Cooking Grid.

3.You may wrap the Cooking Grid and Flame Diffusers in aluminum foil and place inside the Hood or store inside your dwelling.

4.Place a grill cover over the grill and store outdoors if possible. It may be stored indoors only if the LP Gas Cylinder is disconnected from the gas grill and stored outside.

5.Before next use, remove aluminum foil and reinstall Burners, Flame Diffusers, and Cooking Grids.

6.Before using the grill after periods of storage or non-use (i.e. over winter), check your LP gas grill for gas leaks, deterioration, proper assembly, and Burner obstructions.

7.Periodically check and tighten all nuts, bolts, and screws.

Image 33
Contents For Outdoor Household Use Only. Not for Commercial Use 68046805Carbon Monoxide Hazard Tools Required for Assembly Supplied with GrillPreparation for Assembly ContentsBox Description Packing List- ModelPacking List- Model Assembly Instructions Step Caster AssemblyStep Cabinet Bottom Assembly Step Side Panel Assembly Step Cabinet Upright Assembly Step Front Crossbar AssemblyCylinder Blocking Wire Assembly Step Cylinder Guard AssemblyCenter Wheel Assembly Model Door Handle Assembly StepDrawer Positioning Step Drawer AssemblyStep Hood/Body To Cart Assembly Step Door AssemblyStep Side Table Assembly Side Burner Valve Connection Side Burner Valve AssemblyStep Side Burner Igniter Wire Connection Step Side Burner Control Knob AssemblySide Burner Grid Assembly Step Bottom Body Panel Assembly Foil Pan/Grease Pan AssemblyStep Warming Rack Assembly Step Battery in Igniter Installation Step Flame Diffuser/Cooking Grid AssemblyConnecting/Disconnecting the Gas Using GasLP Gas Cylinder LP Hose and Regulator Connecting LP Gas CylinderInstallation Codes Before Using Your LP Gas GrillSelecting a Location Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Model Off position Lighting the Grill Using the Pulse-Spark IgnitorManual Lighting of the Grill on Lighting the Side Burner Sear Burner or Rotisserie BurnerManually Lighting the Grill Lighting the Side Burner Check The FlameManually Lighting the Side Burner Manually Lighting the Side Burner Grill Cooking Direct Method Cooking On the Gas GrillRoasting Indirect Method Direct Cooking on the GridsIndirect Cooking Roasting End of Cooking Session Warming RackCleaning the Grill Care and MaintenanceHow to Clean the Burners Open up Storage Emergencies TroubleshootingSee How to Clean Burners in Care and Maintenance Rises up while filling Then stops when fullParts Illustration- Model Key Description Quantity Parts List- ModelParts Illustrations- Model Meco Corporation Limited Warranty Limited Warranty