Trunk Group: Create a Trunk Group and select “isdn” as the Group Type and a TAC number based on your switches dial-plan. Ensure “PRI/BRI” is the Carrier Medium, this is used for ISDN trunks. Set Dial Access to “Y” and Service type is “tie”, this gives the most universal type of connection. All other prompts are default.
Figure 4. Trunk–Group Administration
Signaling Group: Create a Signaling Group for the PRI D-channel. The Group Type default is “isdn-pri”; this creates a channel to control the Bearer channels on the T-1 card. Select the T-1 port that will be used as the Primary D-channel and assign the Trunk Group for Channel Selection. All other prompts are default.
Figure 3. Signaling-Group D-Channel Configuration
Jsl | © 2002 Avaya Inc All Rights Reserved | IP Enabling Siemens |
| | Hicom with Avaya |
| | MultiVantage Solutions |
LPH 11-27-02 | | 6 |
