Hicom Configurations, Assign trunk Group Members

Trunk Group Members: Assign trunk ports to the Trunk Group. Up to 255 ports can be assigned to each ISDN Trunk Group. The Sig Grp prompt will display the signaling group after the Trunk Group is created and assigned to the Signaling Group.

Figure 5. Assign trunk Group Members

6. Hicom Configurations:

The following listing of Command Line Interface (CLI) text is intended to be an accurate representation of the actual administrative visuals for implementing the translations required for the Hicom 300.

Typical Cabinet Configuration:

<dis-bcsu:tbl;

(Displays Board Configuration Switching Unit)

H500: AMO BCSU STARTED

ADDRESS NOM. BOARD TYPE V/R ACTUAL BOARD LWVFIDFIRMWAREBD STATUS CCN

----------			+-----------------------------------------			+-+----------------------		+------------		+-------------	+------------------		+-----	+
1.	1.	37		Q2161-X	DSC80		Q2161-X	1	2	D961-D	READY		1
1.	1.	49		Q2146-X	SLMA2		Q2146-X	1	0	-11 -	READY		24
1.	1.	55		Q2485-X	TMC16P		Q2485-X	1	0	D429-B	READY		16
1.	1.	61		Q2158-X SLMO24 R			Q2158-X	1	0	-05 -	READY		24
1.	1.	67		Q2158-X SLMO24 R			Q2158-X	1	0	-05 -	READY		24
1.	1.	73		FREE			FREE
1.	1.	79		FREE			FREE						0
1.	1.	85		Q2452-X	TMDID		Q2452-X	1	0	B008-D	READY		8
1.	1.	91		FREE			FREE						0
1.	1.	97		Q2233-X	SIUX		Q2233-X	1	2	D802-B	READY		8
1.	1.103 FREE						FREE						0

				Jsl		© 2002 Avaya Inc All Rights Reserved						IP Enabling Siemens
												Hicom with Avaya
												MultiVantage Solutions
			LPH 11-27-02									7