Lift the grill pan clear of the support frame. The support frame is held to the side rails by two clips on each side.
For each side, support the side rail with one hand and with the other hand lift the frame up and out of the side clips.
For safety, push the side rails back into the grill chamber.
The side rails can be removed to make cleaning the grill chamber easer by unhooking them from the grill chamber sides.
Slides can be wiped clean with soft cloth and mild detergent.
Do not use any abrasive substance.
DO NOT put the side runners in a dishwasher
When you have finished, hook the side rails back onto the sides of the chamber. To refit the frame pull the side rails forward and for each side in turn support the side rail and press the frame down into the side rails. Replace the grill pan.
Control Panel and Doors
The control panel and control knobs should only be cleaned with a soft cloth wrung out in clean hot soapy water - but take care that no surplus water seeps into the appliance. Wipe with a clean dampened cloth then polish with a dry cloth. The oven doors should only be cleaned with a soft cloth wrung out in clean hot soapy water.
Cookers with window doors
On some models the oven door front panel can be taken off so that the glass panels can be cleaned. If the top edge of the oven door of your cooker has a line of holes and there are screws in the side edges then it can be taken apart for cleaning.
Move the cooker forward to gain access to the sides (see the ‘Moving the cooker’ section of these instructions).
Open the oven door slightly and remove the front panel fixing screws from the door sides (two each side).
some window doors only
Carefully lift off the outer door panel. The inside face of the glass panels can now be cleaned - take care not to disturb or wet the door insulation. Please note that the door is triple glazed but the inner two panels are fixed and should not be separated. After cleaning
17