Rangemaster U109360 - 01 manual To Remove Grill Element, To Remove an Oven Inner Back

Page 31

WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have finished.

Check correct door operation.

17.To Remove Grill Element.

Disconnect from electricity supply.

Remove grill pan from grill chamber. From inside grill compartment remove enamelled front shield from grill roof, 2 screws and washers. Remove 2 screws and washers securing the grill element front support. Remove the screws from the grill elements.

Lift elements out carefully, disconnect the leads from the element terminals noting their position. If it is not possible to disconnect the leads in this way, pull cooker forward to gain access to the rear, remove screws securing the electric cover to the back sheet and remove cover and disconnect the terminals from the rear.

Fit new elements, reassemble in reverse order. Check operation of grill.

18.To Remove an Oven Inner Back.

Open the oven door and remove the screws and washers securing the inner back to the back of the oven.

Carefully lift away the inner back. Reassemble in reverse order making sure that the 4 screws and washers are fully tightened.

20To Remove an Oven element Thermal Cut-Out.

Disconnect from the electricity supply.

Pull the cooker forward to gain access to the cover box. Undo the cover screws and lift clear. The cutout is located on the earth plate beside the oven element connections. Disconnect the cutout wiring. Undo the fixings that secure the cutout to the earth plate and remove. Fit replacement control and re-assemble in reverse order.

21.To Remove Oven Element.

Disconnect from electricity supply. Remove oven inner back (see 18).

Remove 2 screws from the

top of the element and 1 from the bottom of the element

in side the oven. Lift element out carefully, disconnect the terminals connected to the

element noting their positions.

If it is not possible to disconnect the leads in this way, pull cooker

forward to gain access to the rear.

Remove screws securing the electric cover to the back sheet and remove cover and disconnect the terminals from the rear.

Fit new element, and reassemble in reverse order. Check operation of oven.

22. To change oven light bulb.

LH Oven

Remove the oven furniture and side linings. Remove the oven rear liner.

RH Oven

Remove the oven inner back (see 18). The oven light cover is now accessible. Unscrew the cover.

19.To Change Fan in Oven.

Disconnect from electricity supply.

Pull cooker forward to gain access to the rear. Remove screws securing the electric cover to the back sheet and remove cover. Disconnect the 3 terminals connected to the fan noting their position. Remove oven inner back (see 18). Hold the fan blade and remove the centre nut (left hand thread) 2 brass washers, fan blade and Circlip. Unscrew fan retaining nuts and washers (3 off each) and lift the fan away from the rear of the cooker. Fit new fan and reassemble in reverse order. Check operation of oven.

Unscrew the bulb.

Fit an Edison screw fitting 15w 240v lamp, FOR OVENS. It must be a special bulb, heat resistant to 300°C.

31

Image 31
Contents Deluxe Installation & Service Instructions U109360Peculiar smells Make sure that the cooker is wired in and switched onBe safe Electricity onContents Use only pans that are suitable for ceramic hobs HobNever cook directly on the surface Glide-out Grill Ovens To stop automatically ClockTo set the time of day To time something that’s cooking minute minderAuto is showing, you want to reset to manual cooking Cooking using the timerClock Special Features Defrost Multi-function oven functionsBoth Ovens Rapid ResponseConventional oven top and base heat Fan ovenFanned grilling in the oven Fan assisted ovenHandyrack. Any other vessel could be unstable Maximum weight that can be held byMain Oven shelves Handyrack Supplied meat tin, which is designed to fitTall oven shelves Oven lightPage Oven cooking guide Glide out Grill It’s very easy to clean the Hob with a recommended cleanerBefore use Do not put the side runners in a dishwasher Control Panel and DoorsTall Oven Main OvenSide panels of the main oven can be removed Cleaning Table Moving your cooker TroubleshootingOven temperature getting hotter as the cooker gets older Power failureLeft hand Main oven not coming on when turned on manually Left hand Main oven not coming on when automatic cookingClean only parts listed in this guide General Safety InstructionsSpecification of this cooker should not be altered Take care that no water seeps into the applianceDo not use the surface as a cutting board You will also need the following tools InstallationUnpacking the Cooker Positioning the CookerChecking the parts Levelling Moving the CookerFitting a stability bracket Fitting the plinth Electrical ConnectionHotplate Oven checkCustomer care Door adjustmentThank you Servicing Notes To Remove Main Oven Door To Adjust the Main Oven Door Catch KeepTo Change Grill Controller To Remove Grill DoorTo Remove Oven Element To Remove Grill ElementTo Remove an Oven Inner Back To Remove an Oven element Thermal Cut-OutTechnical Data Page Key to circuit diagram Colour Code 1kW 02kW A21.65kW 56kW 121206