Garland MWE3W operation manual Probe Calibration, Thermocouple Locations

Page 23

GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W

INSTALLATION/OPERATION MANUAL

PROBE CALIBRATION

Monthly Calibration of Grill Temperature Zones

Tools: Digital Pyrometer with Surface Probe

Warning: PERSONAL INJURY FROM BURNS MAY RESULT WHEN COMING IN CONTACT WITH HOT COOKING SURFACES.

NOTE: Calibration of grills is done with release material sheets “OFF”.

PLEASE FOLLOW THESE INSTRUCTIONS EXACTLY AS THEY APPEAR BELOW:

1.The upper platens and lower grill plate should be at operating temperatures to perform this calibration

procedure. Press the or button to select a “CLAM” operation and allow the grill to reach the set temperature and stabilize, (approximately 30 minutes).

7.PRESS the button to lock the calibrated temperature into the controller.

8.Press the or button to select the next heat zone.

9.Move the pyrometer’s surface probe to the newly selected heat zone and repeat steps 5, 6, and 7.

10.Repeat the procedure for each of the heat zones.

11.Continue to cycle through each heat zone repeating the sequence until all temperatures are within 1°.

12.Exit the program mode by pressing the button 2x. The controller will return to its previous state in the Normal Operating Mode.

THERMOCOUPLE LOCATIONS

2.PRESS and HOLD the button for approximately

3 seconds, or until the controller will displays: “PROBE CAL”.

3.PRESS the button to display the first temperature zone to be calibrated. The first zone to be calibrated is “FRONT TEMP CAL”. The zones are displayed in order of

FRONT TEMP CAL, MIDDLE TEMP CAL, BACK TEMP CAL, TOP TEMP CAL.

9.360

 

 

11.500

 

 

[292mm]

 

 

5.750

 

 

[146mm]

[238mm]

(FROM FRONT

OF PLATEN)

PLATEN THERMOCOUPLE

LOCATIONS (VIEW FROM BOTTOM)

MWE3W: The electric grill’s thermocouple probes are located front to rear, as shown in the diagram to the right. Each upper platen has one thermocouple in the center.

MWG3W: The gas grill’s thermocouple probes are located in the center of each lane, as shown in the diagram to the right. Each upper platen has one thermocouple in the center.

4.Select a heat zone display using the or buttons.

5.Allow at least 5 seconds for the pyrometer to respond and stabilize. Note the temperature on the pyrometer.

6.If the temperature on the grill control display does not match the temperature on the pyrometer, adjust the

temperature on the grill control accordingly. The button will increase the displayed temperature in one,

(1) degree increments. The button will decrease the displayed temperature in one, (1), degree Increments.

 

 

 

 

36.000

 

 

 

 

 

[914mm]

 

 

 

 

 

18.000

 

 

 

 

 

[457mm]

 

19.732

[501mm]

[325mm]

 

 

 

 

12.814

[150mm]

 

 

 

 

5.896

 

 

 

 

 

6.110

FRONT

6.110

 

 

 

OF GRILL

 

 

 

[155mm]

[155mm]

 

 

 

 

24.000

[610mm]

NOTE: During step 6, the control should be sounding a high-pitched tone. The temperature can only be adjusted if this tone is sounding. If the control is silent, the temperature will not change.

PART #4521777 (03/19/08)

Page 23

Image 23
Contents Manufactured Exclusively for McDonalds by InstallationPage Contents Introduction WarrantySafety McDonalds MRC Card 11A Shipping Damage Claim ProcedureCleaning & Maintenance Following information is also available onRinse the upper platens with a dripping wet grill cloth Reverse NO-SCRATCH Pad, and use clean side208V / 220V 208V / 60Hz 220V / 60Hz 240V / 60Hz SpecificationsModel MWE3W 50-AMPStart-up does include InstallationInstallation Store Responsibilities Start-Up does not includeUncrate unit from crating material InstallationHood Type Installation of Release Material Installation of Splash Shield Platen Auto-Calibrate Possible Error MessagesDescription of Grill Control Menu Item Library Operating ProceduresGeneral Overview To Select a Menu itemTo display the current temperatures Indicator LightsStandby Mode To Exit the Standby ModeProduct Recognition Program Logic Control Programming Programming Modes System SetupTo change the name of an existing menu item To change the grill surface set point temperatureProgramming Modes Menu Items To Change the Must Remove in time To change the grill upper platen set point temperatureTo Change the Toast Buns Alarm Auto / Manual To Change the Toast Buns timeTo Add NEW Menu Items Operating modeTools Digital Pyrometer with Surface Probe Repeat the procedure for each of the heat zonesProbe Calibration Thermocouple LocationsFlat Menu Menu ItemsClam Menu Programming System Function Options Configure MenuTemperature Conversion Temperature Conversion
Related manuals
Manual 2 pages 12.75 Kb

MWE3W specifications

The Garland MWE3W is a high-performance commercial oven known for its efficiency, reliability, and advanced features, designed to meet the demanding needs of modern kitchens. It combines cutting-edge technology with user-friendly design, making it a preferred choice among chefs and restaurant owners.

One of the standout features of the MWE3W is its three-deck configuration, allowing it to accommodate multiple dishes simultaneously. This is particularly beneficial in busy establishments where productivity is key. Each deck has independent temperature controls, enabling chefs to cook various items at different temperatures, thus maximizing kitchen efficiency.

The oven utilizes innovative heating technologies, including a high-efficiency convection system that ensures even heat distribution. This technology not only speeds up cooking times but also contributes to uniform results, which is crucial for baking applications. The MWE3W’s consistent performance minimizes the risk of undercooked or unevenly cooked food, which can be a significant concern in a fast-paced kitchen environment.

Another notable characteristic of the MWE3W is its stainless steel construction, which provides durability and ease of cleaning. The material is resistant to corrosion and wear, making it suitable for the rigorous demands of commercial kitchens. Additionally, its sleek design enhances the aesthetic appeal of any kitchen, reflecting a professional ambiance.

The oven also features digital controls with intuitive interfaces, allowing chefs to program cooking times and temperatures with precision. These smart controls often include pre-set cooking modes for different types of food, which simplifies the cooking process and reduces the chances of human error.

Moreover, the MWE3W is designed to be energy-efficient, helping restaurants lower their utility costs without compromising performance. This feature aligns with the growing emphasis on sustainability in the culinary industry, making it an attractive option for eco-conscious establishments.

Safety is another priority in the design of the MWE3W. It is equipped with features such as automatic shut-off mechanisms and thermostat protection to prevent overheating. These safety measures ensure a secure working environment for kitchen staff.

In summary, the Garland MWE3W is a robust and versatile commercial oven, ideal for any establishment looking to enhance its culinary capabilities. With its three-deck design, advanced heating technologies, user-friendly controls, durable construction, and energy efficiency, it stands out as a top choice for professional kitchens aiming to deliver high-quality dishes consistently. Whether for baking, roasting, or multiple cooking tasks, the MWE3W delivers unmatched performance and reliability.