Sear Station Burner Lighting, To Extinguish | Weber E/S 470 specification

22	OPERATING INSTRUCTIONS

SEAR STATION™ BURNER LIGHTING

Summary lighting instructions are inside the left hand cabinet door.

DANGER

Failure to open the lid while igniting the barbecue’s burners, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

The Sear Station™ burner has an on or off control setting. To ignite the Sear Station™ burner you must first ignite the two adjacent main burners.

ARRÊTÉ	EN MARCHE
OFF	ON
APAGADO	ENCENDIDO
B	A
B.	A.
OFF	ON

ADJACENT MAIN BURNER SNAP IGNITION

Note: Each main burner control knob snap igniter creates a spark from the igniter electrode to the burner lighting tube.You generate the energy for the spark by pushing in the control knob and turning to“START/HI”.This will ignite each individual burner.

WARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber. com®.

1)Open the lid.

2)Make sure all burner control knobs are turned off. (Push control knob in and turn clockwise to ensure that it is in the “OFF” position.)

3)Turn the cylinder on by turning the cylinder valve counterclockwise.

WARNING: Do not lean over the open barbecue.

4)Ignite each adjacent Sear Station™ main burner. Push the control knob in and turn to “START/HI” until you hear the igniter snap - continue to hold control knob in for two seconds. This action will spark the igniter, the burner lighting tube and then main burner.

5)Check that the burner is lit by looking through the cooking grates. You should see a flame. If burner does not light on first try, push control knob in and turn to OFF. Repeat lighting procedure a second time.

To ignite the Sear Station™ burner continue with Step 6.

Sear Burner Lighting: Ignition by an adjacent ignited Main Burner.

6)Turn -Sear Station™ burner control knob to the ON position.

7)Verify burner ignition by visual inspection of a flame.

WARNING: If ignition does not occur in 5 seconds, turn burner control OFF, wait 5 minutes, and repeat steps 6 & 7, or see Match Lighting instructions.

WARNING: If the burner still does not light, turn the burner control knob to “OFF” and wait 5 minutes to let the gas clear before you try again or try to light with a match.

Note: See Maintenance for burner removal and cleaning procedure.

TO EXTINGUISH

Push in and turn each burner control knob clockwise to “OFF” position. Turn gas supply off at the source.

SEAR STATION™ BURNER LIGHTING

4 6

*The grill illustrated may have slight
differences than the model purchased.	3
	3

EN MARCHE

ENCENDIDO

WWW.WEBER.COM®

E/S 470 specifications

The Weber E/S 470 is a cutting-edge electric bicycle designed to offer an exceptional riding experience while promoting sustainability. It stands out in the electric bike market with its combination of advanced features, robust technology, and comfort-focused characteristics. The E/S 470 caters to a diverse range of cyclists, from daily commuters to recreational riders.

One of the standout features of the Weber E/S 470 is its powerful electric motor. The bike is equipped with a high-performance mid-drive motor that delivers impressive torque and speed. This ensures that riders can tackle even the steepest hills with ease, while also providing a natural feel that closely mimics traditional cycling. The motor is seamlessly integrated with the bike's gears, allowing for smooth shifting and enhanced control over various terrains.

Battery life is a crucial factor for any electric bike, and the Weber E/S 470 excels in this area. It comes with a high-capacity lithium-ion battery that offers an impressive range on a single charge. Depending on the mode selected, riders can expect anywhere from 40 to 80 miles of assistance, making it perfect for both short commutes and longer adventures. The battery is conveniently detachable, allowing for easy charging at home or in the office.

In terms of design, the E/S 470 is characterized by its sleek and modern aesthetics. It features a lightweight aluminum frame, making it easy to handle while ensuring durability. The bike's geometry is carefully crafted to provide an upright riding position, which enhances comfort, especially during long rides. The inclusion of front and rear suspension allows for a smooth ride over uneven surfaces, absorbing shocks and providing stability.

Technological innovations further enhance the user experience of the Weber E/S 470. The bike is equipped with an intuitive digital display that provides key information such as speed, distance traveled, battery level, and assistance mode. Riders can easily switch between different levels of pedal assist, tailoring the bike's performance to their personal preferences and riding conditions.

Safety is paramount, and the Weber E/S 470 includes high-quality hydraulic disc brakes that ensure reliable stopping power in all weather conditions. The bike also features integrated lighting systems for enhanced visibility during night rides and a set of durable tires designed for traction and stability.

Overall, the Weber E/S 470 is an exemplary model in the world of electric cycling. With its powerful motor, long-range battery, comfortable design, and user-friendly technology, it appeals to a broad audience looking for an eco-friendly and efficient mode of transportation. The E/S 470 embodies the perfect blend of performance and practicality, making it an ideal choice for anyone looking to embrace electric mobility.

OPERATING INSTRUCTIONS