Regulating Heat
Adding Charcoal/Wood During Cooking
To increase heat, more wood and/or charcoal may be needed or an adjustment to the air vents may be necessary. Follow instructions in “Adding Charcoal/Wood During Cooking” section of this manual.
To maintain the temperature, more wood and/or charcoal may need to be added or an adjustment to the air vents may be necessary during the cooking cycle.
NOTE: Dry wood burns hotter than charcoal, so you may want to increase the ratio of wood to charcoal to increase the cooking temperature. Hardwood such as oak, hickory, mesquite, fruit and nut wood are an excellent fuel because of their burning rate. When using wood as fuel, make sure the wood is seasoned and dry. DO NOT use resinous wood such as pine as it will produce an unpleasant taste.
Additional charcoal and/or wood or an adjustment to the air vents may be necessary to maintain or increase cooking temperature.
Step 1
Stand back and carefully open grill lid. Use caution since flames can
WARNING: Wear protective gloves or oven mitts when adjusting door
handle, ash tray, cooking height or air vents.
Step 2
Use charcoal grate adjuster crank to place charcoal grate at the lowest level of cooking chamber. Open door to allow access to charcoal grate.
Step 3
Stand back a safe distance and use long cooking tongs to lightly brush aside ashes on hot coals. Use cooking tongs to add charcoal and/or wood to charcoal grate, being careful not to
WARNING: Never add charcoal lighting fluid to hot or even warm coals as flashback may occur causing severe burns.
Step 4
When charcoal is burning strong again, wear oven mitts/gloves and carefully return charcoal grate to desired cooking level.
Step 5
Close the grill lid and door. Allow food to continue cooking.
15