Brinkmann Gas Kettle Grill Turning OFF the Grill, Operating the Grill, Breaking in Your Grill

Page 11

NOTE: Observe flame height when lit: Flame should be a Blue/Yellow color between 1”–2” high.

TURNING OFF THE GRILL:

1.Turn OFF the LP tank valve.

2.Turn burner control knob to the OFF position.

2”

1”

0”

NOTE: Turn off LP cylinder first to prevent gas from being left in the system under pressure.

CAUTION!

The LP tank valve should always be in the off,

or closed, position when the grill is not in use.

To turn off the LP tank valve,

turn knob clockwise until it stops.

WARNING

OPERATING THE GRILL:

Never use Charcoal or Lighter Fluid inside your Gas Grill. Read and follow all warnings and instructions contained in the preceding sections of this manual.

BREAKING IN YOUR GRILL:

In manufacturing and preserving the components of your grill, oil residue may be present on the burner and cooking surfaces of your grill.

Before cooking on your grill for the first time you should operate it for 15 minutes on "HIGH" to burn off these residual oils.

PREHEATING THE GRILL:

Prior to use, it is recommended that you preheat your grill. This ensures that the grilling surfaces are at the desired temperatures to sear the food sugars when cooking. After lighting your grill, set the burner control knob to the "HIGH" position for 10 to 15 minutes.

10

Image 11
Contents Save this Manual for Future Reference For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Hose and Regulator Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Connecting Hose and Regulator to AN LP GAS Cylinder Checking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Burner Lighting InstructionsLighting the Burner Preheating the Grill Turning OFF the GrillOperating the Grill Breaking in Your GrillTo Minimize FLARE-UPS Controlling FLARE-UPSHardware Cleaning and MaintenanceTransporting and Storage Before Storing Your GrillHeat Shield Burner and VenturiCooking Grills Problem Possible Causes Burner will not light Trouble ShootingHelpful Hints CleanlinessGrilling to Proper Temperature Assembly Instructions Parts BAG Contents Step Align bottom shelf/tank support with holes in the legs Place dome lid on grill body and align hinges Place heat shield into lower grill body just above burner Grease cup Ashguard/grease cup holder Brinkmann Gas Kettle Grill Assembled Accessories 251-800-468-5252 Page ONE-YEAR Limited Warranty