Brinkmann Gas Kettle Grill Trouble Shooting, Problem Possible Causes Burner will not light

Page 15

TROUBLE SHOOTING:

Problem:

 

Possible Causes:

• Burner will not light

1.

Check LP cylinder fuel level.

 

2.

Bad electrode spark.

 

 

Check to see if the grill will match light.

 

 

Electrode or collector may need adjustment.

 

3.

Venturi may not be properly seated.

 

4.

Venturi may be obstructed.

 

5.

The cylinder valve may be closed.

 

6.

Regulator is not properly seated on cylinder valve.

• Fire at control knobs

1.

Venturi is obstructed. See section on

 

 

Cleaning and Maintenance of the Venturi.

 

2.

Venturi is improperly seated on control valve.

 

3.

Gas connections may be loose.

 

 

Leak Check and tighten all connections.

• Yellow Flames at burner

1.

Venturi is obstructed. See section on

 

 

Cleaning and Maintenance of the Venturi.

Flame blows out on "LOW"1. Venturi may be obstructed. See section on Cleaning and Maintenance of the Venturi.

2.Grill is not sufficiently preheated.

3.Venturi is improperly seated on control valve.

Burner does not get hot enough 1. Flow control device has been activated in regulator.

2.Turn off the grill and the fuel supply. Disconnect the grill from the cylinder valve. Reconnect the grill to the cylinder and light grill. See section on Connection to the LP Cylinder.

• Grill is Too Hot

1.

Excess grease build-up causing grease fires.

 

2.

Damaged or faulty regulator.

 

 

Replace with factory authorized parts.

 

3.

Cook on a lower temperature setting.

14

Image 15
Contents Save this Manual for Future Reference For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Installing the LP GAS Cylinder Onto the Grill Filling the LP GAS CylinderHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder Leak Testing When to Perform a Leak TestChecking for Leaks PRE-START Check List Lighting Instructions Lighting the BurnerMatch Lighting the Burner Preheating the Grill Turning OFF the GrillOperating the Grill Breaking in Your GrillTo Minimize FLARE-UPS Controlling FLARE-UPSHardware Cleaning and MaintenanceTransporting and Storage Before Storing Your GrillBurner and Venturi Cooking GrillsHeat Shield Problem Possible Causes Burner will not light Trouble ShootingCleanliness Grilling to Proper TemperatureHelpful Hints Assembly Instructions Parts BAG Contents Step Align bottom shelf/tank support with holes in the legs Place dome lid on grill body and align hinges Place heat shield into lower grill body just above burner Grease cup Ashguard/grease cup holder Brinkmann Gas Kettle Grill Assembled Accessories 251-800-468-5252 Page ONE-YEAR Limited Warranty