Brinkmann Gas Kettle Grill Transporting and Storage, Before Storing Your Grill, Hardware

Page 13

WARNING

TRANSPORTING AND STORAGE:

Never move a grill when it is hot or when objects are on the cooking surfaces.

Make sure that cylinder valve is shut off. After moving the grill check that all gas connections are free of leaks. Check the venturi tubes to ensure they are properly connected to the valves and the orifices are inside the venturi tube.

Follow the instructions listed below.

BEFORE STORING YOUR GRILL:

Ensure that the fuel supply tank valve is fully closed.

Clean all surfaces.

Lightly coat the burner with cooking oil to prevent excess rusting.

If storing the grill indoors, disconnect the LP tank and leave the LP tank OUTDOORS.

Place a protective cap cover on the LP tank and store the tank outdoors in a well ventilated area out of direct sunlight.

If storing the grill outdoors, cover the grill with a grill cover for protection from

the weather. A grill cover can be purchased by contacting: The Brinkmann Corporation at 1-800-527-0717.

CLEANING AND MAINTENANCE:

For safe grilling and peak performance of your grill, perform these checks at least twice per year or after extended periods of storage.

HARDWARE

Be sure to tighten up all hardware (nuts, bolts, screws, etc.) at least twice per year.

12

Image 13
Contents Save this Manual for Future Reference For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder When to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Burner Lighting InstructionsMatch Lighting the Burner Operating the Grill Turning OFF the GrillBreaking in Your Grill Preheating the GrillTo Minimize FLARE-UPS Controlling FLARE-UPSTransporting and Storage Cleaning and MaintenanceBefore Storing Your Grill HardwareCooking Grills Burner and VenturiHeat Shield Problem Possible Causes Burner will not light Trouble ShootingGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions Parts BAG Contents Step Align bottom shelf/tank support with holes in the legs Place dome lid on grill body and align hinges Place heat shield into lower grill body just above burner Grease cup Ashguard/grease cup holder Brinkmann Gas Kettle Grill Assembled Accessories 251-800-468-5252 Page ONE-YEAR Limited Warranty