Brinkmann Gas Kettle Grill owner manual Installation Information, Cylinder Specifications

Page 4

WARNING

FOR OUTDOOR USE ONLY. DO NOT operate indoors or in an enclosed area such as garage, shed or breezeway.

Use your grill OUTDOORS in a well ventilated space away from dwellings or other buildings to prevent dangers associated with gas accumulation and toxic vapors. We recommend your grill be situated at least 10 feet from buildings.

Maintain a minimum clearance of 24 inches (60 cm) between all sides of grill and walls or other combustible material.

DO NOT install in or on a recreational vehicle and/or boat.

INSTALLATION INFORMATION:

The installation of this appliance must be in accordance with:

All applicable local codes, or in the absence of local codes, either:

National Fuel Gas Code,

ANSI Z223.1 1988 or latest edition (USA)

Natural Gas Installation Code: CAN/CGA B149.1 (Canada)

Propane Installation Code: CAN/CGA B149.2 (Canada)

To check your local codes, see your local LP gas dealer or natural gas company.

This grill was not intended to be connected to a natural gas supply line.

WARNING

LP GAS CYLINDER (NOT SUPPLIED WITH THIS GRILL)

The LP (Liquid Propane) gas cylinder specifically designed to be used with this grill must have a 20 lb. (9.1 kg) capacity incorporating a Type 1 cylinder valve and an over-filling protection device (OPD).

DO NOT connect this grill to an existing #510 POL cylinder valve with Left Hand threads. The Type 1 valve can be identified with the large external threads on the valve outlet.

DO NOT connect to a propane cylinder exceeding this capacity.

DO NOT connect to a cylinder that uses any other type of valve connection device.

CYLINDER SPECIFICATIONS:

When purchasing or exchanging a cylinder for your gas grill, it must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339 as applicable with a listed over-filling prevention device (OPD).

3

Image 4
Contents Save this Manual for Future Reference Important Safety For Your SafetyPage Installation Information Cylinder SpecificationsPage Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder When to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Burner Lighting InstructionsMatch Lighting the Burner Turning OFF the Grill Operating the GrillBreaking in Your Grill Preheating the GrillControlling FLARE-UPS To Minimize FLARE-UPSCleaning and Maintenance Transporting and StorageBefore Storing Your Grill HardwareCooking Grills Burner and VenturiHeat Shield Trouble Shooting Problem Possible Causes Burner will not lightGrilling to Proper Temperature CleanlinessHelpful Hints Assembly Instructions Parts BAG Contents Step Align bottom shelf/tank support with holes in the legs Place dome lid on grill body and align hinges Place heat shield into lower grill body just above burner Grease cup Ashguard/grease cup holder Brinkmann Gas Kettle Grill Assembled Accessories 251-800-468-5252 Page ONE-YEAR Limited Warranty