Brinkmann Gas Kettle Grill owner manual Align bottom shelf/tank support with holes in the legs

Page 20

Step 3

Align bottom shelf/tank support with holes in the legs.

Step 4

Insert wing bolts through holes in legs into bottom shelf/tank support.

NOTE: When securing wing bolts, twist legs for proper alignment with bottom shelf/tank support.

Step 5

Secure legs into leg sockets using three #8 X 3/8” sheet metal screws.

19

Image 20

Contents Save this Manual for Future Reference Important Safety For Your SafetyPage Installation Information Cylinder SpecificationsPage Hose and Regulator Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Connecting Hose and Regulator to AN LP GAS Cylinder Checking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Burner Lighting InstructionsLighting the Burner Turning OFF the Grill Operating the GrillBreaking in Your Grill Preheating the GrillControlling FLARE-UPS To Minimize FLARE-UPSCleaning and Maintenance Transporting and StorageBefore Storing Your Grill HardwareHeat Shield Burner and VenturiCooking Grills Trouble Shooting Problem Possible Causes Burner will not lightHelpful Hints CleanlinessGrilling to Proper Temperature Assembly Instructions Parts BAG Contents Step Align bottom shelf/tank support with holes in the legs Place dome lid on grill body and align hinges Place heat shield into lower grill body just above burner Grease cup Ashguard/grease cup holder Brinkmann Gas Kettle Grill Assembled Accessories 251-800-468-5252 Page ONE-YEAR Limited Warranty