Teledyne operating instructions Introduction Model OT-2 System

1 Introduction Model OT-2 System

•Accurate (±2% of full scale at constant temperature on 100 ppm, or 1000 ppm scale; ±1 ppm on 0–10 ppm scale at constant temperature)

•Insensitive to flow variations

•Fast response and recovery

•Long life, maintenance-free Micro-Fuel Cell oxygen sensor

•Unaffected by reducing agents (HC's, CO, SO2, etc.)

•Easy to calibrate, no zero gas required

•12VDC Battery Powered w/ 1-5 VDC Output

•Rugged NEMA 4, bulkhead mounted enclosure

•Stainless Steel sample system (nylon cell holder)

•H2S scrubber

•Pressure regulation with gage

•Sample filter

•Flowmeter

•Heated cell holder assembly

1.3Typical Applications

Although the OT-2 System is designed in conjunction with the Elsag Baily Total Flow TM System for natural gas production, it also is capable of monitoring oxygen at the ppm level in a variety of gases. A few typical applications include:

•Gas gathering and transportation

•Monitoring inert gas blanketing

•Air separation and liquefaction

•Chemical feedstock analysis

•Petrochemical process control

•Heat treating and bright annealing processes

•Quality assurance

•Gas certification

•Welding applications

1-2 Teledyne Analytical Instruments