Omron Healthcare HEM-907XL manual General advice

Page 3

NOTES ON SAFETY

Unplug the AC adapter from the electric outlet if this unit is unused for an extended period of time.

Unplug the AC adapter from the electric outlet when installing, removing, or cleaning the unit.

Confirm readings with a stethoscope when an irregular pulse wave is displayed or when the measured value is questionable or erratic.

Use an AC adapter indicated for use with a power supply of 110 VAC.

Do not share an electric outlet with other unit or electric appliance.

After cleaning this unit, dry it well before plugging the AC adapter in the electric outlet.

If this unit fails to perform as indicated, discontinue use, turn off the unit, unplug the AC adapter from the electric outlet, and contact OMRON’s repair department.

Do not disassemble or modify this unit.

Do not use any cuff other than the models exclusive for this unit.

Do not use this unit on infants.

Do not use this unit on patients using a pump oxygenator.

Do not use an AC adapter or battery pack not specified for this unit.

NOTES ON SAFETY

Do not use a cellular phone near this unit.

Do not use this unit in a vehicle.

Do not install the parts and/or instruments not specified for this unit.

Do not use a broken power cord or AC adapter.

Do not install or store this unit where it may come in contact with water or liquid medication.

This is a Class II device with double isolation. Earth pin is not for protective purposes.

General advice

Do not place or put anything on this unit.

Do not drop this unit.

Turn off power to the unit and unplug the AC adapter from the electric outlet before moving the unit.

Read the instruction manual of the other devices to be used at the same time with this unit, to understand and be aware of the interaction between the devices.

When using the unit

Do not inflate the cuff without being wrapped over the arm.

Do not use a damaged cuff.

Be sure that patients do not touch the Buttons of this unit.

After using the unit

Do not disinfect this unit by autoclave or gas sterilization (EtO, gluteraldehyde, or high concentration ozone).

Do not install or store this unit in the following places.

Under the direct sunlight,

Dusty or salty environment,

Places having slope, vibration, and/or shock,

Storage of chemicals or where combustable gas may be generated,

Under high temperature and high humidity.

4

5

Image 3
Contents Know Your Unit How to Measure Blood PressureSpecifications Be Sure to Read This SectionExemptions General advice Features of the Product Maintenance and inspectionTroubleshooting Included and also available separately Components of the ProductIntelliSense Blood Pressure Monitor, Model HEM-907XL Not included Cuffs without bladder BladdersNames of the Parts Features and FunctionsNon-display function Functions settingInflation level setting P-SET AVG Function settingSelect the cuff according to the arm size HOW to Apply the CuffHOW to USE the Power Source How to use the AC adapterInstallation and Replacement of Battery Pack List of Measurement Modes Blood Pressure in Single Mode HOW to MeasureBlood Pressure in Average Mode Unit does not automatically deflate in the Manu Mode Blood Pressure in Manual ModeWhat you need to prepare HOW to CheckPressure Accuracy in Check Mode How to checkList of Error Codes TroubleshootingWrap the cuff correctly, Specifications Five Year Limited WarrantyFor Customer Service Call Toll Free