Omron Healthcare BP652 instruction manual Battery Installation

Page 11

BATTERY INSTALLATION

CAUTION

Use only 1.5V “AAA” alkaline batteries with this device.

1. Press the hook on the bottom of the battery cover and lift the cover off in the direction of the arrow.

2. Install 2 “AAA” size batteries so the + (positive) and - (negative) polarities match the polarities of the battery compartment as indicated.

3. Set the date and time.

Refer to “Setting the Date and Time”.

4. Replace the battery cover.

NOTE: Make sure that the battery cover is securely in position.

11

Image 11

Contents Series Automatic Wrist Blood Pressure Monitor Table of Contents Introduction Operating the Device Safety InformationCare and Maintenance Before Taking a Measurement Components Know Your UnitUnit Display Positioning indicator Diastolic blood pressureMovement Error Symbol Display SymbolsIrregular Heartbeat Symbol Monitor is not intended to be a diagnostic device Use only 1.5V AAA alkaline batteries with this device Battery InstallationBattery Replacement Setting the Month Setting the Date and TimeTo Start the Setting Setting the YearSetting the Minute Setting the DAYSetting the Hour Setting the Positioning Indicator Setting the Advanced Positioning Sensor APSSetting the Buzzer Setting for Right or Left Wrist MeasurementResetting to the Default Setting Applying the Cuff on the Left Wrist Applying the Wrist CuffApplying the Cuff on the Right Wrist Taking a Measurement Press the START/STOP button to turn the monitor off To Display the Measurement Values Using the Memory FunctionAveraging Function To Delete ALL Values Stored in the Memory Clean the monitor with a soft dry cloth Care and MaintenanceSymbol Cause Correction Error IndicatorsProblem Causes and Solutions Troubleshooting TipsFCC Statement Limited Warranty Specifications Omron Healthcare, Inc