Omron Healthcare BP652 instruction manual Specifications

Page 29

 

SPECIFICATIONS

 

 

Model:

BP652 (HEM-6052-Z)

 

Display:

LCD Digital Display

 

Measurement Range:

Pressure: 0 to 299 mmHg, Pulse: 40 to 180/min.

 

Accuracy/Calibration:

Pressure: ±3mmHg or 2% of reading

 

 

Pulse: ±5% of reading

Inflation:

Automatic by electric pump

 

Deflation:

Automatic pressure release valve

 

Rapid Air Release:

Automatic exhaust valve

 

Measurement Method:

Oscillometric method

 

Power Source:

1.5V 2 “AAA” batteries

 

Battery Life:

Approx. 300 uses with 2 new alkaline batteries

 

Operating Temperature

50ºF to 104ºF (10ºC to 40ºC) /15 to 90% RH

 

/Humidity:

 

 

Storage Temperature /

-4ºF to 140ºF (-20ºC to 60ºC) /10 to 95% RH

 

Humidity/Air Pressure:

700-1060 hPa

Main Unit Weight:

Approximately 4 oz. (114g)

 

 

not including batteries

Main Unit Dimensions:

Approx. 2 3/4”(l) × 2 3/4”(w) × 7/8” (h)

 

 

(70 mm × 70 mm × 21 mm) (not including the wrist cuff)

Measurable circumfer-

Approximately 5 1/4” to 8 1/2” (13.5 to 21.5 cm)

 

ence of wrist:

 

 

Memory:

Up to 100 readings per user

 

Contents:

Main Unit, Storage Case, 2 “AAA” Alkaline Batteries,

 

 

Instruction Manual, and Quick Start Guide

 

NOTE: These specifications are subject to change without notice.

29

Image 29
Contents Series Automatic Wrist Blood Pressure Monitor Table of Contents Introduction Operating the Device Safety InformationCare and Maintenance Before Taking a Measurement Components Know Your UnitUnit Display Positioning indicator Diastolic blood pressureMovement Error Symbol Display SymbolsIrregular Heartbeat Symbol Monitor is not intended to be a diagnostic device Use only 1.5V AAA alkaline batteries with this device Battery InstallationBattery Replacement To Start the Setting Setting the Date and TimeSetting the Year Setting the MonthSetting the Minute Setting the DAYSetting the Hour Setting the Positioning Indicator Setting the Advanced Positioning Sensor APSSetting the Buzzer Setting for Right or Left Wrist MeasurementResetting to the Default Setting Applying the Cuff on the Left Wrist Applying the Wrist CuffApplying the Cuff on the Right Wrist Taking a Measurement Press the START/STOP button to turn the monitor off To Display the Measurement Values Using the Memory FunctionAveraging Function To Delete ALL Values Stored in the Memory Clean the monitor with a soft dry cloth Care and MaintenanceSymbol Cause Correction Error Indicators Problem Causes and Solutions Troubleshooting TipsFCC Statement Limited Warranty Specifications Omron Healthcare, Inc