SETTING THE ADVANCED POSITIONING SENSOR (APS)
SETTING FOR RIGHT OR LEFT WRIST MEASUREMENT
1. While in the setting mode, press the SET button until
the wrist symbol (
or 
) appears on the display. NOTES: • The default setting is “
”.
• After you choose “oFF” for the Positioning indicator, the monitor skips this process.
2. Press the MEM button to select the left wrist (
) or the right wrist (
).
SETTING THE BUZZER
1. While in the setting mode, press the SET button until the buzzer symbol (
) appears on the display. NOTE: The default setting is “on1” or “on”,
depending on the Positioning indicator you set.
2. Press the MEM button to select the buzzer setting.
16