Omron Healthcare BP652 instruction manual Setting the Advanced Positioning Sensor APS

Page 15

SETTING THE ADVANCED POSITIONING SENSOR (APS)

You can change the options for various settings on your monitor. Pressing the SET button to change a setting. Press the MEM button to select the options for that setting. After selecting a setting, press the START/STOP button to confirm the setting and turn the power off.

SETTING THE POSITIONING INDICATOR

1.Select your User ID.

2.Press the SET button.

NOTE: The default setting is “on1”.

User A

User B

3.Press the MEM button to select the Positioning indicator “on1”,“on2”, or “oFF”.

on1: After the Positioning indicator lights in blue for more than 2 seconds, or in orange for more than 5 seconds, measurement starts automatically, even though the monitor is not in the proper position.

on2: The Positioning indicator lights in blue for more than 2 seconds, measurement starts automatically.

Measurement will not start if it lights in orange.

oFF: Measurement starts without the Positioning indicator.

15

Image 15

Contents Series Automatic Wrist Blood Pressure Monitor Table of Contents Introduction Operating the Device Safety InformationCare and Maintenance Before Taking a Measurement Components Know Your UnitUnit Display Positioning indicator Diastolic blood pressureDisplay Symbols Irregular Heartbeat SymbolMovement Error Symbol Monitor is not intended to be a diagnostic device Use only 1.5V AAA alkaline batteries with this device Battery InstallationBattery Replacement Setting the Month Setting the Date and TimeTo Start the Setting Setting the YearSetting the DAY Setting the HourSetting the Minute Setting the Positioning Indicator Setting the Advanced Positioning Sensor APSSetting the Buzzer Setting for Right or Left Wrist MeasurementResetting to the Default Setting Applying the Cuff on the Left Wrist Applying the Wrist CuffApplying the Cuff on the Right Wrist Taking a Measurement Press the START/STOP button to turn the monitor off Using the Memory Function Averaging FunctionTo Display the Measurement Values To Delete ALL Values Stored in the Memory Clean the monitor with a soft dry cloth Care and MaintenanceSymbol Cause Correction Error IndicatorsProblem Causes and Solutions Troubleshooting TipsFCC Statement Limited Warranty Specifications Omron Healthcare, Inc