Omron Healthcare BP652 instruction manual Using the Memory Function, Averaging Function

Page 22

USING THE MEMORY FUNCTION

Every time you complete a measurement the monitor stores the blood pressure and pulse rate for each user (A and B) in the memory. The monitor automatically stores up to 100 sets of measurement values (blood pressure and pulse rate) for each user (A and B). When 100 sets of measurement values are stored, the oldest record is deleted to save the most recent values.

AVERAGING FUNCTION

The monitor calculates the average reading based on up to the three most recent sets of measurement values taken within 10 minutes of the most recent reading.

NOTE: If two sets of measurement values are stored in the memory for the 10 minute period, the average is based on the two sets of measurement values. If only one set of measurement values is stored, this is displayed as the average.

TO DISPLAY THE MEASUREMENT VALUES

1.Press the MEM button to display the average reading based on the three most recent sets of measurement values taken within 10 minutes of the most recent reading. The Average Value Symbol (  ) appears on the display when the average reading is shown.

2.Press the MEM button to display the set of measurement values from the most recent to the oldest.

Alternating date/time display

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Series Automatic Wrist Blood Pressure Monitor Table of Contents Introduction Safety Information Operating the DeviceCare and Maintenance Before Taking a Measurement Know Your Unit ComponentsPositioning indicator Diastolic blood pressure Unit DisplayIrregular Heartbeat Symbol Display SymbolsMovement Error Symbol Monitor is not intended to be a diagnostic device Battery Installation Use only 1.5V AAA alkaline batteries with this deviceBattery Replacement Setting the Year Setting the Date and TimeTo Start the Setting Setting the MonthSetting the Hour Setting the DAYSetting the Minute Setting the Advanced Positioning Sensor APS Setting the Positioning IndicatorSetting for Right or Left Wrist Measurement Setting the BuzzerResetting to the Default Setting Applying the Wrist Cuff Applying the Cuff on the Left WristApplying the Cuff on the Right Wrist Taking a Measurement Press the START/STOP button to turn the monitor off Averaging Function Using the Memory FunctionTo Display the Measurement Values To Delete ALL Values Stored in the Memory Care and Maintenance Clean the monitor with a soft dry clothError Indicators Symbol Cause CorrectionTroubleshooting Tips Problem Causes and SolutionsFCC Statement Limited Warranty Specifications Omron Healthcare, Inc
Top Page Image Contents