Omron Healthcare BP652 instruction manual Taking a Measurement

Page 20

TAKING A MEASUREMENT

The monitor is designed to take measurements and store the measurement values in memory for two people using USER ID A and USER ID B. The monitor can be used to take a single measurement using the GUEST mode are not stored in the memory.

1. Sit comfortably in a chair with your feet flat on the floor.

2. Select your User ID (A or B).

User A

User B

3.Hold your arm across your chest at heart level.

Hold your elbow firmly to avoid body movement.

Sit still and do not talk or move during the measurement.

4. When arm is in correct position orange light will turn on.

20

Image 20

Contents Series Automatic Wrist Blood Pressure Monitor Table of Contents Introduction Safety Information Operating the DeviceCare and Maintenance Before Taking a Measurement Know Your Unit ComponentsPositioning indicator Diastolic blood pressure Unit DisplayMovement Error Symbol Display SymbolsIrregular Heartbeat Symbol Monitor is not intended to be a diagnostic device Battery Installation Use only 1.5V AAA alkaline batteries with this deviceBattery Replacement Setting the Date and Time To Start the SettingSetting the Year Setting the MonthSetting the Minute Setting the DAYSetting the Hour Setting the Advanced Positioning Sensor APS Setting the Positioning IndicatorSetting for Right or Left Wrist Measurement Setting the BuzzerResetting to the Default Setting Applying the Wrist Cuff Applying the Cuff on the Left WristApplying the Cuff on the Right Wrist Taking a Measurement Press the START/STOP button to turn the monitor off To Display the Measurement Values Using the Memory FunctionAveraging Function To Delete ALL Values Stored in the Memory Care and Maintenance Clean the monitor with a soft dry clothError Indicators Symbol Cause CorrectionTroubleshooting Tips Problem Causes and SolutionsFCC Statement Limited Warranty Specifications Omron Healthcare, Inc