Omron Healthcare BP652 instruction manual Troubleshooting Tips, Problem Causes and Solutions

Page 26

TROUBLESHOOTING TIPS

PROBLEM

CAUSES AND SOLUTIONS

 

 

No power.

Replace both batteries with new ones at the same

time. Check the battery installation for proper

No display appears on the unit.

placement of the battery polarities.

 

 

Blood pressure varies constantly. Many factors

Measurement values appear too

including stress, time of day, how you wrap the

cuff, may affect your blood pressure.

high or too low.

Review the sections “Before Taking a

 

 

Measurement” and “Taking a Measurement”.

 

 

26

Image 26
Contents Series Automatic Wrist Blood Pressure Monitor Table of Contents Introduction Safety Information Operating the DeviceCare and Maintenance Before Taking a Measurement Know Your Unit ComponentsPositioning indicator Diastolic blood pressure Unit DisplayMovement Error Symbol Display SymbolsIrregular Heartbeat Symbol Monitor is not intended to be a diagnostic device Battery Installation Use only 1.5V AAA alkaline batteries with this deviceBattery Replacement Setting the Year Setting the Date and TimeTo Start the Setting Setting the MonthSetting the Minute Setting the DAYSetting the Hour Setting the Advanced Positioning Sensor APS Setting the Positioning IndicatorSetting for Right or Left Wrist Measurement Setting the BuzzerResetting to the Default Setting Applying the Wrist Cuff Applying the Cuff on the Left WristApplying the Cuff on the Right Wrist Taking a Measurement Press the START/STOP button to turn the monitor off To Display the Measurement Values Using the Memory FunctionAveraging Function To Delete ALL Values Stored in the Memory Care and Maintenance Clean the monitor with a soft dry clothError Indicators Symbol Cause CorrectionTroubleshooting Tips Problem Causes and SolutionsFCC Statement Limited Warranty Specifications Omron Healthcare, Inc