HoMedics SPS-060 manual Potential for Electromagnetic Interference

Page 14

7.Do not fold the cuff and tubing tightly.

8.Do not disassemble the monitor or cuff. If in need of repair, refer to the warranty section of this manual.

9.Do not subject the monitor to extreme shocks (do not drop on floor).

10.Do not inflate the cuff unless wrapped around arm.

11.Do not wrap the cuff around body parts other than your arm.

12.Do not drop or insert any object into any opening or hose.

13.To avoid accidental strangulation keep this product away from children. Do not drape tube around neck.

14.This monitor may not meet its performance specifications if stored or used outside of these temperature and humidity ranges:

• Storage Environment

• Operating Environment

Temperature:

Temperature:

-4°F~158°F (-20°C~70°C)

50°F~104°F (10°C ~40°C)

Humidity:

Humidity:

less than 90% RH

15% ~ 90% RH

25

BPS-060_B.indd 27-28

POTENTIAL FOR

ELECTROMAGNETIC INTERFERENCE

To avoid inaccurate results caused by electromagnetic interference between electrical and electronic equipments, do not use the device near a cell phone or microwave oven.

26

5/01/10 1:27 PM

Image 14
Contents Manual Inflate Blood Pressure Monitor Table of Contents Important Product Notices and Safety Instructions About Blood Pressure HOW this Blood Pressure Monitor Works NAME/FUNCTION of Each PartDisplay Symbols Display ExplanationsInstalling Batteries Replace the batteries ifDate & Time SET Procedure Using the ARM CuffPlug the cuff tube into the left side of the unit Measurement Procedure Important NotesMeasurement is then automatically stored into memory Clearing Values from Memory Risk Category IndexRecalling Values from Memory CARE, Maintenance & Cleaning Important Notes Regarding Your Blood Pressure MeasurementPotential for Electromagnetic Interference Troubleshooting SpecificationsMonitor de Presión Sanguínea de Inflado Manual Información DE USO ÍndiceInformación Inicial Avisos Importantes DEL Producto Instrucciones DE Seguridad Sobre LA Presión Sanguínea Cómo Funciona Este Monitor DE Presión Sanguínea NOMBRE/FUNCIÓN DE Cada PiezaExplicaciones DE LA Pantalla Símbolos de la pantallaProcedimiento DE Configuración DE Fecha Y Hora Instalación DE LAS PilasUSO DEL Brazalete Flecha de ColorProcedimiento DE Medición NotaPara interrumpir la medición, puede presionar los botones Cómo Borrar LOS Valores DE LA Memoria Índice DE Categoría DE RiesgoCómo Recuperar LOS Valores DE LA Memoria CUIDADO, Mantenimiento Y Limpieza Potencial DE Interferencia Electromagnética Diagnóstico Y Resolución DE Problemas EspecificacionesDistribuido por