HoMedics SPS-060 manual Display Explanations, Display Symbols

Page 6

DISPLAY EXPLANATIONS

Date/Time Indicator

Systolic

Pressure

Diastolic

Pressure

Heart Rate

9

BPS-060_B.indd 11-12

Display Symbols:

Inflation Symbol: Appears when cuff requires inflation.

Deflation Symbol: Appears when cuff is deflating.

Weak Battery Symbol: Appears when batteries should be replaced.

Pulse Symbol: Shows the heart rate per minute.

Memory Average: Displays average of last 3 readings.

Risk Category Index: See page 21 for more information.

If and any of the following letters and numbers appear in the area that systolic pressure should be displayed, an error has occurred with your reading. See Troubleshooting section of this manual for more information.

Measurement Error: Measure again. Wrap the cuff correctly and keep arm steady during measurement.

Air Circuit Abnormality: Check cuff connection. Measure again.

Pressure Exceeding 300 mmHg: Turn the unit off to clear, then measure again.

Error Determining Measurement Data: Measure again.

10

5/01/10 1:27 PM

Image 6
Contents Manual Inflate Blood Pressure Monitor Table of Contents Important Product Notices and Safety Instructions About Blood Pressure HOW this Blood Pressure Monitor Works NAME/FUNCTION of Each PartDisplay Symbols Display ExplanationsInstalling Batteries Replace the batteries ifDate & Time SET Procedure Using the ARM CuffPlug the cuff tube into the left side of the unit Measurement Procedure Important NotesMeasurement is then automatically stored into memory Risk Category Index Recalling Values from MemoryClearing Values from Memory CARE, Maintenance & Cleaning Important Notes Regarding Your Blood Pressure MeasurementPotential for Electromagnetic Interference Troubleshooting SpecificationsMonitor de Presión Sanguínea de Inflado Manual Índice Información InicialInformación DE USO Avisos Importantes DEL Producto Instrucciones DE Seguridad Sobre LA Presión Sanguínea Cómo Funciona Este Monitor DE Presión Sanguínea NOMBRE/FUNCIÓN DE Cada PiezaExplicaciones DE LA Pantalla Símbolos de la pantallaProcedimiento DE Configuración DE Fecha Y Hora Instalación DE LAS PilasUSO DEL Brazalete Flecha de ColorProcedimiento DE Medición NotaPara interrumpir la medición, puede presionar los botones Índice DE Categoría DE Riesgo Cómo Recuperar LOS Valores DE LA MemoriaCómo Borrar LOS Valores DE LA Memoria CUIDADO, Mantenimiento Y Limpieza Potencial DE Interferencia Electromagnética Diagnóstico Y Resolución DE Problemas EspecificacionesDistribuido por