HoMedics SPS-060 manual Installing Batteries, Replace the batteries if

Page 7

INSTALLING BATTERIES

1.Press down on latch and lift the battery cover towards you to open the battery compartment.

2.Install or replace 4 “AA” sized batteries in the battery compartment according to the indications inside the compartment.

3.Replace the battery cover by clicking in the bottom hooks first, then push in the top end of the battery door.

Battery

Cover

Replace the batteries if:

1.The weak battery symbol appears on the display.

2.Nothing appears on the display when the power is switched on.

As the supplied batteries are for test only, they may be discharged earlier than batteries you buy in stores. Replace all batteries at one time (as simultaneous set). Use only 1.5V AA alkaline batteries. Remove batteries when unit is not in use for extended periods of time. Date and time will need to be reset if batteries are removed or replaced. Clean contacts on battery and in battery compartment with a soft dry cloth each time you install batteries.

Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.

11

BPS-060_B.indd 13-14

12

5/01/10 1:27 PM

Image 7

Contents Manual Inflate Blood Pressure Monitor Table of Contents Important Product Notices and Safety Instructions About Blood Pressure NAME/FUNCTION of Each Part HOW this Blood Pressure Monitor WorksDisplay Explanations Display SymbolsReplace the batteries if Installing BatteriesUsing the ARM Cuff Date & Time SET ProcedurePlug the cuff tube into the left side of the unit Important Notes Measurement ProcedureMeasurement is then automatically stored into memory Recalling Values from Memory Risk Category IndexClearing Values from Memory Important Notes Regarding Your Blood Pressure Measurement CARE, Maintenance & CleaningPotential for Electromagnetic Interference Specifications TroubleshootingMonitor de Presión Sanguínea de Inflado Manual Información Inicial ÍndiceInformación DE USO Avisos Importantes DEL Producto Instrucciones DE Seguridad Sobre LA Presión Sanguínea NOMBRE/FUNCIÓN DE Cada Pieza Cómo Funciona Este Monitor DE Presión SanguíneaSímbolos de la pantalla Explicaciones DE LA PantallaInstalación DE LAS Pilas Procedimiento DE Configuración DE Fecha Y HoraFlecha de Color USO DEL BrazaleteNota Procedimiento DE MediciónPara interrumpir la medición, puede presionar los botones Cómo Recuperar LOS Valores DE LA Memoria Índice DE Categoría DE RiesgoCómo Borrar LOS Valores DE LA Memoria CUIDADO, Mantenimiento Y Limpieza Potencial DE Interferencia Electromagnética Especificaciones Diagnóstico Y Resolución DE ProblemasDistribuido por