![](/images/new-backgrounds/1199937/19993727x1.webp)
RECALLING VALUES FROM MEMORY
This monitor can be used by two individuals.
Each user can store up to 60 measurements.
1. Press the | / | |
button. | ||
|
2.Choose User 1 or User 2.
3.Press the “M” button to access the memory.
4.The monitor will first display the calculated average applied to the last 3 memories.
5.Every new press of the “M” button will recall a previous reading. The latest reading will be recalled first.
25
CLEARING VALUES FROM MEMORY
1. Press the
/
2. Continue to press the “M” button for approximately 5 seconds, then the data for the selected user will be erased automatically.
S |
| ||
S | TAR | T | |
TO | |||
|
| ||
| P |
|
/
Note: The data stored in memory for both users may be erased if any of the batteries are removed. (Users should first record the data in a Blood Pressure log before replacing or removing batteries.)
26