HoMedics BPW-201 manual Date & Time SET Procedure, Applying the Cuff

DATE & TIME SET PROCEDURE

1.To adjust the date/time, press the Set button located on the top of the monitor.

2.The display will show a blinking number showing the HOUR. Change the HOUR by pressing the

button. Each press will increase the number by one in a cycling manner. Press the Set button

again to confirm the entry, and the screen will show a blinking number representing the

MINUTE.

3.Change the MINUTE, MONTH, DAY and YEAR as described in Step 2 above, using the button

to change the numbers and the Set button to confirm the entries.

Press the button

blinking HOUR

increasing HOUR

confirm the entry

repeat process to set MINUTE,

MONTH, DAY and YEAR

APPLYING THE CUFF

1.Remove all watches, wrist jewelry, etc. prior to attaching the wrist monitor. Clothing sleeves should be rolled up and the cuff should

be wrapped around bare skin for correct measurements.

2.	Apply cuff to left wrist with	Fig. A
	palm facing up as shown in
	Fig. A.
3.	Make sure the edge of the
	cuff is about 1/4”~1/2” (1 cm)
	from the palm as shown in
	Fig. B.	Fig. B

17 18