15.1.3Removing the Control P.C. Board
6.Remove the drip proof cover.
7.Disconnect the connectors (lead wires of the compressor, sensor, and others).
8.Remove the screw at the right side of the control box, and pull out the entire control box.
9.Release the control P.C. Board tab to remove the control P.C. Board.
15.1.4Removing the Propeller Fan and Fan Motor
1.Follow the steps in 15.1.1 for removing the cabinet top plate and cabinet front plate.
2.Remove the propeller fan by removing the nut turning clockwise at its center.
29